Operation Manual

ManualsBrandsGodox ManualsVideoTT680 N

TT680-N

Nikon i-TTL Compatible Flash

INSTRUCTION MANUAL

说明手册

Thank you for purchasing a GODOX product.

The GODOX TT680-N camera flash applies to Nikon DSLR cameras

and is compatible with i-TTL autoflash. It supports Multi/Stroboscopic

flash function, as well as auto and manual zoom function with a flash

coverage of 24 to 105 mm. With this i-TTL compatible flash, your

shooting will become simpler. You can easily achieve a correct flash

exposure even in complex lighting-changing environment.

中英文双语 / Chinese English Bilingual

82.ATT680N0-00

Summary of content (9 pages)

PAGE 1
TT680-N Nikon i-TTL Compatible Flash INSTRUCTION MANUAL 说明手册中英文双语 / Chinese English Bilingual Thank you for purchasing a GODOX product. The GODOX TT680-N camera flash applies to Nikon DSLR cameras and is compatible with i-TTL autoflash. It supports Multi/Stroboscopic flash function, as well as auto and manual zoom function with a flash coverage of 24 to 105 mm. With this i-TTL compatible flash, your shooting will become simpler.
PAGE 2
Contents 1.Getting Started and Basic Operation---------------------------------- 03 2.Using Flash-------------------------------------------------------------------06 3.Reference --------------------------------------------------------------------13 H Conventions used in this Manual ● The operation procedures in this instruction manual assume that both the camera and camera flash’s power switches are ON. ● Reference page numbers are indicated by (p.**).
PAGE 3
Getting Started and Basic Operation Installing the Batteries--------------------------------------------------------03 Attaching to the Camera-----------------------------------------------------04 Turning on the Power Switch------------------------------------------------04 Fully Automatic Flash Shooting---------------------------------------------04 Using i-TTL Autoflash in the Shooting Modes---------------------------05 Cautions for firing continuous flashes ● To avoid overheating and degrading the flas
PAGE 4
1. Set the Camera Flash to TTL Flash Sync Speeds and Apertures Used i-TTL auto flash mode. 0.5 0.7 1 1.5 1.7 2.3 4 5 2 3 13 18 m 7 10 15 20 30 40 60 ft 4 6 9 35 mm F 56 Zoom 60 5.0 ● Press the button so that is displayed. 2. Focus the subject. • Press the shutter button halfway to focus. • The shutter speed and aperture will be displayed in the viewfinder. • Check that the < > icon is lit in the viewfinder.
PAGE 5
-7-90 1. Focus the subject. 2. Press the button. • Aim the subject at the center of the viewfinder and press button. • The camera flash will fire a preflash and the required flash output for the subject is retained in memory. 270 • Each time you press the button, a preflash will be fired and a new flash exposure setting will be locked. The FV lock icon < > will be displayed in the viewfinder. • If is not displayed on the LCD panel, FV lock cannot be set.
PAGE 6
• If you set the flash coverage manually, make sure it covers the lens focal length so that the picture will not have a dark periphery. • If you use a commercially-available sync cord to connect the camera to the camera flash' PC terminal, set the flash zoom manually. Using the Wide Panel Pull out the wide panel and place it over the flash head as shown. The flash coverage will then be extended to 14 mm. • The catchlight panel will come out at the same time. Push the catchlight panel back in.
PAGE 7
Maximum Stroboscopic Flashes Flash Output Hz 1/4 1/8 1/16 1/32 1/64 1/128 1 Hz 6 14 30 60 90 90 3 Hz 5 12 30 60 90 90 4 Hz 4 10 20 50 80 80 5 Hz 4 8 20 40 70 70 6 Hz 3 6 20 32 56 56 7 Hz 3 6 20 28 44 44 8 Hz 3 5 10 24 36 36 9 Hz 3 5 10 22 32 32 10 Hz 2 4 8 20 28 28 2 4 8 12 24 24 2 Hz 20 Hz 30 Hz 40 Hz 50 Hz 60 Hz 70 Hz creating multiple lighting effects. It is respectively applicable to manual flash environment.
PAGE 8
Protection Function • AF-Assist Beam Effective range (approx.) 1.Over-Temperature Protection • To avoid overheating and deteriorating the flash head, do not fire more than 20 continuous flashes in fast succession at 1/1 full power. After 20 continuous flashes, allow a rest time of at least 10 minutes.
PAGE 9
Troubleshooting Guide displayed. • You used Manual Flash mode. If there is a problem, refer to this Troubleshooting Guide. →Set the flash mode to or modify the flash output. The Camera Flash cannot be charged. • The batteries are installed in the wrong direction. Photos have dark corners or only parts of the target subject are illuminated. • The focal length of lens exceeds the flash coverage. →Install the batteries in the correct direction. →Check the flash coverage you set.