Instruction Manual

Wireless Remote Control
With 433 MHz wireless system, this product has remote grouping and control function.
Up to 6 groups of video lights can be controlled. 16 channels are available with strong
anti-interference capability.
Please set the channels and groups of video light to the same as those of remote
control before usage.
When using the White Version, please set the color temperature of the remote control
as 5600K constantly;
When using the Yellow Version, please set the color temperature of the remote control
as 3300K constantly;
Adjusting Channel/Group of the Video Light
Press the CH/GRP button and the group icon blinks. Turn the select dial to choose a
group ID (A to F).
Press the CH/GRP button twice and the channel icon blinks. Turn the select dial to
choose a channel ID (1 to 16).
Adjusting Channel/Group of the Remote Control
Press the CH/GRP button and the group icon blinks. Press the”-““+” button to choose
a group ID (A to F).
Press the CH/GRP button twice and the channel icon blinks. Press the”-““+” button to
choose a channel ID (1 to 16).
Adjusting Light Brightness/Color Temperature with the Remote Control
Press the”-““+” button to adjust the light brightness.
Press the SET button of the remote control once and the color temperature icon blinks.
Press the”-““+” button to adjust the color temperature.
Other Operation Tips:
Pressing the ON/OFF button on the remote control can turn on/off all the video light
groups.
Pressing the “SET” button on the remote control for 2 seconds can turn on/off the
current video light group.
Please remove the battery if the light will not be used for an extended period of time.
When there are some abnormal situations in the inner video light, the relevant
LCD signs will blink as warnings. For example:
1. When the fan stops working due to fault, II signs will blink to alarm.
2. When heatsink’ temperature is over 70 Celsius degrees, the temperature
on the LCD panel will blink and the video light will stop working.
* Product design and specifications are subject to change without notice.
Technical Data:
Note: Remote control purchased separately
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Video Light
AC Power Supply
Channel
Group
Power
Color Temperature
100% Illuminance
(LUX)
100% Luminous
Flux
Color Rendering Index
R9
TLCI(Qa)
Light Brightness Range
Operation Temperature
Safe Temperature
Dimension
Net Weight
5600K±200K
3300K±200K3300K±200K
5600K±200K
3300K±200K
5600K±200K
SL-100W
AC 100~240V 50/60Hz
16
6 groups (A, B, C, D, E, F)
100W
6500(1m)
13000
>93
>80
>95
10%~100%
-10~50°C
≤70°C
34x23x13cm
Approx. 2.41kg
SL-100Y
SL-150W
150W
7200 (1m)
16000
34x23x13cm
Approx. 2.39kg
SL-150Y SL-200W
200W
12000 (1m)
20000
39x23x13cm
Approx. 3.16kg
SL-200Y
(Not included the Lamp Cover) (Not included the Lamp Cover) (Not included the Lamp Cover)
White Version Yellow Version White Version Yellow Version White Version Yellow Version