User Manual

ManualsBrandsGodox ManualsLighting & StudioQS600II 2-Light Studio Flash Kit

说明手册

Instruction Manual

中英文双语

Chinese English Bilingual

双子

G S 系列影室闪光灯

C o m p a c t S t u d i o F l a s h

705-GS0000-02 Made In China

地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋

Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong

Town, Baoan District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423

邮箱/E-mail: godox@godox.com

http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

Summary of content (5 pages)

PAGE 1
双子 GS系列影室闪光灯 C o m p a c t S t u d i o F l a s h 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.
PAGE 2
维护保养 FOREWORD 闪光灯在工作时，如发现异常，应立即关掉电源，查明原因。灯体应避免震动，平时注意表面除尘。灯体稍有发热为正常现象，无特别需要时，勿连续引闪。除灯管与造型灯消耗品用户可用原厂配置的自行装卸更换外，所有闪光灯概由本厂指定可供原厂配件之维修部负责。 1年保修，由于灯管与造型灯为消耗品，不在1年保修范围。经发现擅自检修此闪光灯，将取消闪光灯之一年保修期，维修需要收取相关费用。如果本品出现故障或者被水淋湿，唯有在专业人员维修后方可继续使用。在维修和清洁本品时请断开电源。如有技术更改，恕不另行通知。 Thanks for choosing Gemini GS series studio flash. It is a durable and good quality strobe with complete functions to help photographers create desired lighting effects. The product is suited for wedding, portrait, and product photography.
PAGE 3
Warning NAMES OF PARTS Do not disassemble or modify. Should the product break down, send the defective back to the authorized service center for inspection and maintenance. Keep dry. Do not handle with wet hands, immerse in water, or expose to rain. Keep out of reach of children. Please put the device in a ventilation environment and keep the parts of lighting and heat dissipation holes are unobstructed. Do not use in flammable environment.
PAGE 4
SEPARATELY SOLD ACCESSORIES The product can be used in combination with the following accessories sold separately, so as to achieve best photography effects: FT-16 Remote Control, Power Inverter, Softbox, Photographic Umbrella, Light Stand, Barndoor, Snoot, etc. Modeling lamp will be off automatically after lighting for 2 hours, avoiding overheat due to long-time lighting when the user is not nearby. When there is flammable accessory on the flash unit, do not keep the modeling lamp on for a long time.
PAGE 5
Memory Function TECHNICAL DATA The device is equipped with memory function for the panel setting. It will help remember the panel setting 3 seconds after you set it. When starting up the flash next time, the panel setting will be the same as that before powering it off.