User Manual

Operation

● Switch: long press the power switch to power on the LED light and long press the

button again to power off.

● Mode selection: press the MODE button to switch the 5600K cold color

temperature and 3300K warm color temperature.

● Channel/group selection: press the CH/GRP button to choose the CH channel

value or GRP group value, then, pressing the “-“ or “+”button to change the channel

or group value.

● Light brightness adjustment: short press the “-” or “+” button to decrease or

increase the value in 1% while long pressing the “-” or “+”button to decrease or

increase the value in 10%. The light brightness can be adjusted from 10% to 100%.

Wireless Remote Control

With 433MHz wireless system, this product has remote grouping and control function.

Up to 6 groups of LED lights can be controlled. 16 channels are available with strong

anti-interference capability.

Please set the channels and groups of LED light stick to the same as those of remote

control before usage.

Adjusting Channel/Group of the LED Light Stick

● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button to

choose a group ID (A to F).

● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or

“+” button to choose a channel ID (1 to 16).

Adjusting Channel/Group of the Remote Control

● Press the CH/GRP button and the group icon blinks. Press the “-” or “+” button

to choose a group ID (A to F).

● Press the CH/GRP button twice and the channel icon blinks. Press the “-” or

“+” button to choose a channel ID (1 to 16).

Adjusting Light Brightness/Color Temperature with the Remote Control

● Press the “-” or “+” button to adjust the light brightness.

● Press the SET button of the remote control once and the color temperature icon

blinks. Press the “-” or “+” button to adjust the color temperature.

● Operation: This LED light stick can be used by handle or on the light stand,

which can be freely applied according to the user requirement.

- 13 -

- 14 -