AD600B TTL一体式外拍闪光灯 TTL ALL-in-One Outdoor Flash 深圳市神牛摄影器材有限公司 GODOX Photo Equipment Co., Ltd. 地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋 Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong Town, Baoan District, Shenzhen 518103, China 电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423 邮箱/E-mail: godox@godox.com http://www.godox.
Warning Foreword Before using this product Always keep this product dry. Do not use in rain or in damp conditions. Please read this user manual carefully in order to ensure your safety and the proper operation of this product. Keep Do not disassemble. Should repairs become necessary, this product must be sent to an authorized for future reference. maintenance center. Stop using this product if it breaks open due to extrusion, falling or strong hit.
Contents 25 Foreword 26 Warning 29 Name of Parts Body LCD Panel Included Accessories Separately Sold Accessories Installing Reflector (Other Accessories) Attaching Flash Tube Adjusting Handle 33 Battery 34 Power Management Wireless Flash Mode 35 Flash Mode— TTL Autoflash FEC (Flash Exposure Compensation) High-Speed Sync 36 Flash Mode—M: Manual Flash 38 Flash Mode—Multi/Stroboscopic Flash 39 Wireless Flash Shooting: Radio (2.
Name of Parts Name of Parts Body: Body: Body: < Mode Selection Button AD600B Group/Channel Button MODE AD600B GR/CH MENU
Name of Parts Name of Parts LCD Panel: Separately Sold Accessories (2) M Manual Flash M: Manual flash Manual flash output AD600B can be used in combination with the following accessories sold separately, so as to achieve best photography effects: X1 Wireless Flash Trigger, FT-16 Remote Control, Softbox, Beauty Dish, Fold Up Umbrella, Snoots, Light Stand, etc.
Battery Battery Features Battery Level Indication 1. This flash unit uses Li-ion polymer battery which has long runtime. The available charge-and-discharge times are 500. 2. It is reliably safe. The inner circuit is against overcharge, overdischarge, overcurrent, and short circuit. 3. Take only 4 hours to fully charge the battery by using the standard battery charger. Attach the battery pack to the flash correctly.
Flash Mode — TTL Autoflash Flash Mode — M: Manual Flash This flash has three flash modes: TTL, Manual (M), and Multi (Stroboscopic). In TTL mode, the camera and the flash will work together to calculate the correct exposure for the subject and the background. * Press Mode Selection Button and three flash modes will display on the LCD panel one by one with each pressing. The flash output is adjustable from 1/1 full power to 1/256th power in 1/3rd stop increments.
Flash Mode — M: Manual Flash Flash Mode — Multi: Stroboscopic Flash Display Flash Duration With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture a multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per sec. expressed as Hz), the number of flashes, and the flash output. Flash duration refers to the length of time that from flash’s firing to reach the half peak at maximum.
Wireless Flash Shooting: Radio (2.4G) Transmission Wireless Flash Shooting: Radio (2.4G) Transmission AD600B adopts Godox 2.4G wireless X system, which has good compatibility with other products of our company. As a slave unit, AD600B is automatically compatible with Canon E-TTL II system and Nikon i-TTL system according to the master unit. When receiving the master unit’s signal, “C” or “N” will be displayed on the LCD panel. Nikon cameras (use X1T-N, TT685N, etc.
Wireless Flash Shooting: Radio (2.4G) Transmission Wireless Multiple Flash Shooting You can divide the slave units into two or three groups and perform TTL autoflash while changing the flash ratio (factor). In addition, you can set and shoot with a different flash mode for each firing group. ● Auto Shooting with Two Slave Groups Wireless Flash: Optical Transmission AD600B supports wireless flash functions and can be set as slave unit. Choose Canon or Nikon optical wireless system through C.
C.Fn: Setting Custom Functions Wireless Flash: Optical Transmission 2. Setting the Communication Channel If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the master unit and the slave unit(s) must be set to the same.
Modeling Lamp Protection Function 3. Change the Setting. * Press button and the Setting Signs are highlighted. * Turn the Select Dial to set the desired number. Press button will confirm the settings. 4. Exit C.Fn Menu. * Press
Technical Data Troubleshooting Model AD600B Wireless Slave Unit Mode Radio transmission mode (compatible with Nikon & Canon) If there is a problem, refer to this Troubleshooting Guide. The flash exposure is underexposed or overexposed. Optical transmission mode (compatible with Nikon & Canon) ● There was a highly reflective object (e.g. glass window) in the picture.
