Instruction Manual

RGB
按无线设置 按键，进入频道/组别/ID设置界面。
RGB
Remote Control
Power Supply
Wireless Frequency
Distance(empty)
Channel
Grouping
ID
Working Environment Temperature
Dimension
Net Weight
RC-R9
3.0V(AAA*2)(not included)
2.4GHz
50m
32 (1 to 32)
16 Group(A B C D E F, 0 to 9)
99 (1-99)
-10~40°C
55x133x10mm
63g
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Instruction Manual
说明手册
遥控器
Remote Control
RC-R9
部件名称
01. OLED屏
02. 电源开关按键
03. 无线设置按键
04. FX特效模式按键
05. CCT双色温模式按键
06. HSI/RGB彩光模式按键
①
②
③
⑥
⑦
⑤
⑧
⑨
⑬
⑮
④
⑭
⑫
⑪
⑩
⑰
⑯
⑳
⑲
⑱
遥控器设置
1. 遥控器频道/组别/ID调整
ID:OFF
>GR:F
CH:32
CH设置：按上下键选中CH频道，按左键或右键选择频道，频道选择范围32个：1-32。
ID:99
GR:A
>CH:32
GR设置：按上下键选中GR频道, 按左键或右键选择组别，组别选择范围16组
(A B C D E F ，0-9)。
ID:OFF
>GR:F
CH:32
>ID:99
GR:F
CH:32
20
20
20
20
的模式：Ⅰ、Ⅱ、Ⅲ3种模式。
按FX进入特效模式，按上键或下键选择特效模式种类，选中后按左右键可选择当前类别中
情景特效模式有14类共39种：可根据需求选择。
2. FX特效模式设置
序号
显示
场景
显示Ⅰ 显示Ⅱ 显示Ⅲ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
彩光循环
闪光灯
激光彩灯
雷闪电
坏灯泡
电视机
蜡烛
火
烟花
警车
消防车
救护车
音乐
SOS
慢速
闪光
生日会
间歇
间歇
慢速
间歇
柴火
短暂
暴闪
暴闪
暴闪
音乐Ⅰ
中速
发布会
KTV
频繁
频繁
中速
频繁
篝火
连续
频闪
频闪
频闪
音乐Ⅱ
快速
狗仔队
迪斯科
持续
持续
快速
持续
火灾
演出
快闪
快闪
快闪
3. 双色温模式
4. 彩光模式
按CCT按键 ，进入双色温模式，按上/下/左/右键调节色温，色温调节范围：
2500K~8500K，上下键以1000进度调节色温，左右键以100进度调节色温。也可直接
选择 对应的色温：3200K、5600K、6500K。
>2500K 100
CCT
>8500K 100
CCT
按HSI按键 进入彩光模式。
调节色相H：按上键或下键选择色相H, 再按左右键调节色相。色相调节范围0-360°。
1. 当前单组灯亮度打开时，按DIM“+”或“-”键调节亮度，亮度调节范围为：0-100%。
5. 亮度调节
规格参数
注：接收端在开机状态下才可以接收无线信号。
遥控器
供电
无线频率
距离(空旷)
频道
分组遥控
ID
工作环境温度
产品尺寸
净重
RC-R9
3.0V(AAA*2)(不包含)
2.4GHz
50米
32个(1-32)
16组(A B C D E F, 0-9)
99个(1-99)
-10~40℃
55x133x10mm
63g
调节饱和度S：按上键或下键选择饱和度S,再按左右键调节饱和度，饱和度调节范围0-100。
也可以直接选择遥控器上对应的彩色：Red、Green、Blue、Cyan、Magenta、Yellow、
Pink、Violet、Orange。
㉑
㉒
705-RCR900-00
Made In China
地址/Add: 深圳市宝安区福海街道塘尾社区耀川工业区厂房2栋
Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen, China
电话/Tel: [phone](8062) 传真/Fax: [phone]
邮箱/E-mail: [e-mail] http://www.godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd.
Names of Parts
①
②
③
⑥
⑦
⑤
⑧
⑨
⑬
⑮
④
⑭
⑫
⑪
⑩
⑰
⑯
⑳
⑲
⑱
Instruction Manual
Remote Control
RC-R9
01. OLED Panel
02. Power Switch
03. Wireless Setting Button
04. FX Special Effects Button
05. CCT Bicolor Mode Button
06. HSI Colorful Light Mode Button
㉑
㉒
07. FN Button
08. DIM Brightness Adjustment Button
09. 3200K Color Temperature Button
10. 5600K Color Temperature Button
11. 6500K Color Temperature Button
12. Red Button
13. Green Button
14. Blue Button
15. Cyan Button
16. Magenta Button
17. Yellow Button
18. Pink Button
19. Violet Button
20. Orange Button
21. Battery Compartment
22. Battery Compartment Cover
S:99
H:360° 0
HSI
07. FN按键
08. DIM亮度调节按键
09. 3200K色温按键
10. 5600K色温按键
11. 6500K色温按键
12. Red按键
13. Green按键
14. Blue按键
15. Cyan按键
16. Magenta按键
17. Yellow按键
18. Pink按键
19. Violet按键
20. Orange按键
21. 电池槽
22. 电池盖
Press wireless setting button to enter channel/group/ID setting interface.
Remote Control Setting
1. Remote Control Channel/Group/ID Adjustment
ID:OFF
>GR:F
CH:32
CH Setting: Press up and down button to choose CH channel and press left or right
button to choose channel value from 1 to 32.
ID Setting: Press up and down button to choose ID and press left or right button to
choose ID value from 1 to 99.
GR Setting: Press up and down button to choose GR group and press left or right button
to choose group value from A to F and 0 to 9.
20
Remote Control Setting
There are 39 kinds of situational special effects modes which are divided into 14 categories
for your choice.
Press FX to enter special effects modes and press left or right button to choose the
categories of them. After choosing the kinds, there are I, II and III modes can be selected.
2. FX Special Effects Modes Setting
No.
Display
Situation
DisplayⅠ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Colorful lights recycle
Flash
Laser colorful lights
Lightning
Broken bulb
TV
Candle
Fire
Firework
Police car
Fire truck
Ambulance
Music
SOS
Slow speed
Flash
Birthday party
Discontinuous
Discontinuous
Slow speed
Discontinuous
Firewood
Brief
Strong flash
Strong flash
Strong flash
Music I
Medium speed
Press conference
KTV
Frequent
Frequent
Medium speed
Frequent
Campfire
Continuous
Frequent flash
Frequent flash
Frequent flash
Music II
Quick speed
Paparazzi
Disco
Sustainable
Sustainable
Quick speed
Sustainable
Fire hazard
Show
Quick flash
Quick flash
Quick flash
Display IIIDisplay II
3. Bicolor Modes
Press CCT button to enter bicolor modes and press up, down, left and right button to
choose the color temperature from 2500K to 8500K. Press the up and down button will
change the color temperature by 1000 per time while pressing the left and right
button by 100 per time. You can also choose 3200K, 5600K and 6500K directly by
pressing the corresponding buttons.
>2500K 100
CCT
>8500K 100
CCT
1. When the current single light's brightness is displayed, press DIM “ + ”or “ - ”button to
adjust the brightness from 0 to 100%.
Press HSI button to enter colorful light modes.
Adjust hue H: press the up or down button to choose hue H. Then, press the left or right
button to adjust hue value from 0 to 360°.
5. Light Brightness Adjustment:
Technique Data
Note: Wireless signals can only be received when the receiving end is powered on.
Adjust saturation S: press the up or down button to choose saturation S. Then, press the
left or right button to adjust saturation value from 0 to 100.
You can also choose Red, Green, Blue, Cyan, Magenta, Yellow, Pink, Violet and Orange
color directly by pressing the corresponding buttons.
4. Colorful Light Mode Setting
RGB
短按电源开关按键开、关机。
RGB
RGB
Short press the power switch button to power on or off the remote control.
2. 打开/关闭单组亮度：按无线设置键进入无线设置界面，按上键或下键选中组别GR，
按FN打开或关闭当前组别灯亮度。显示OFF为关闭状态，显示数字0-100为打开状态。
S:99
>H:360° 100
HSI
>S:99
H:360° 100
HSI
ID:99
GR:A
>CH:32
20
ID:OFF
>GR:F
CH:32
20
>ID:99
GR:F
CH:32
20
2. Turn on/off the single group's brightness: press the wireless setting button to enter
wireless setting interface. Press the up or down button to choose the group GR and
press the FN button to turn on or off the single group's brightness. When the brightness
is off, OFF will be displayed. When the brightness is on, figure 0 to 100 will be
displayed.
S:99
H:360° 0
HSI
S:99
>H:360° 100
HSI
>S:99
H:360° 100
HSI
ID设置：按上下键选中ID, 按左键或右键选择ID, ID选择范围：1-99。
The device has been evaluated to meet
general RF exposure requirement. The
device can be used in portable exposure
condition without restriction.