Use and Care Manual

Step 3
Loosen the 2 bolts in Backrest(A) around half inch by Allen Wrench(
②
).
Step 4
Slide the Tapered Connectors on the Backrest(A) into the Tapered Connectors on the Left Armrest(B) as
shown in the picture.
Repeat the same process with the Right Armrest(C).
Note: Make sure the Tapered Connectors on Backrest(A) lock into the Tapered Connectors on the Left
Armrest(B) and Right Armrest(C).
Keep the Backrest(A) and the back of the Left Armrest(B), Right Armrest(C) flat.
Assistance from an adult partner is necessary for this assembly process.
During this assembly process - do exercise caution. You may need to use your hand to press down and or
pave away the padded surface to facilitate the 'slip and slide' assembly.
Caution: Ensure that your fingers do not get caught or pinched in the assembly process.
Keep the Backrest(A) and
the back of the Left
Armrest(B), Right
Armrest(C) flat.
Backrest (A)
Left Armrest (B)
Right Armrest (C)
Backrest (A)
②
Page 6 OF 10