Installation Guide

PAGE 1
INSTRUCTION Adjustable 4 Rail Panel System Step 3-a Tighten the mounting bracket and L bracket to the wall. Make sure the mounting surface is flat with a minimum 2.5" of bracket height. (Please turn to the next page for ceiling mount) OS Step 1-a Extend the track to the width you need (maximum 86”). DO NOT over extend the track as it may cause to separate completely. Step 2-a Cut down the cardboard B and use it to mark the central screw point.
PAGE 2
€ Use Allen wrench to screw set screws into the bottom bars on flat surface. Please see the front page if wall mounting) XX “L” Bracket x5 “L” Bracket (for wall mount) Connector Screw x5 Step 3-b Tighten the mounting bracket to the ceiling. 0 Make sure the mounting surface is flat with a minimum 2.5” of track depth. Not required for ceiling mount 25° Step 4-b Lock the middle bracket inside the groove first and then lock the other 4 brackets. We recommend additional hands to finish this step.