User's Manual

功能介绍

and keep the microphone 2.5-5 cm away from the mouth. When transmitting,

the radio should be at least 2.5 cm away from the head or body.

Do not turn on/o󰀨 the radio repeatedly during use, and adjust the

volume to a level suitable for your hearing.

Before using the radio for communication, please set the transmitter

and receiver to the same frequency point.

For the analog channel that requires intercom, please set the

transmitter and receiver to the same sub-audio frequency.

For digital channel,

1. If encryption is enabled for the digital channel that requires intercom,

please set the transmitter and receiver to the same password.

2. For the digital channel that requires intercom, please set the

transmitter and receiver to the same color code.

Menu Selection

1. The [Menu] key were set to (i) switch channel, (ii) set high/low

power, and (iii) turn on/o󰀨 scanning. Continue press menu button to

enter to next function.

2. If the radio is not operated for 3 seconds or [PTT] key is pressed, it

will exit the menu mode.

Channel Selection

In the standby state, press the [Menu] key once to enter the channel

selection menu, and then press the [+] or [-] key to select the channel.

The current channel number will be broadcast every time you select.

There are 1-20 channels (analog)/1-32 channels (digital) to choose

from. If the radio is not operated for 3 seconds or [PTT] key is pressed,

it will exit the menu mode.

Channel Scanning

Press the [Menu] key twice to enter the channel scanning menu, press

Features