User's Manual
19
功能介绍
Features
Activate
(Private call only)
1. The activation command is to remove kill status.
2. After sending activation command, it can change the other party
from remote kill state to active state. After restarting, it can be used
normally.
Voice Control Function
1. Preset the [Program] key to [VOX On/O] key through programming
software.
2. Press the [VOX On/O] key to turn on/o the voice control function.
VOX levels can be preset through programming software: Level 1,
Level 2, and Level 3, where Level 3 is the most sensitive. When the
radio VOX function is on, the preset VOX level is used.
TOT Function
In order to prevent some users from occupying the same channel for a
long time, users can set to enable the TOT function. When the user's
continuous transmission time on the current channel reaches the TOT
duration, the radio will stop transmitting and the speaker will give a
time-limit prompt tone. You can set the time out timer via programming
software. By default is 60 seconds. When OFF is selected, user can
transmit continuously.
Squelch Step (SQ)
1. SQ is only valid for analog channels.
2. SQ can be congured through programming software only.
功能介绍
Features