User's Manual

18
respond, the recipient can talk back.
1. Congure “One touch call” through CPS and send “Call Alert”.
2. After “Call Alert” is sent successfully, it will prompt a beep sound
,otherwise error tone will sound.
3. When “Call Alert” is received, alert tone will continue to sound.
Remote Monitor (Private call only)
Remote monitor is used to send a command to the other party, and the
other party’s device sends a voice to the command sender in a secret
state to achieve the purpose of monitoring the other party.
1. The transmission duration of monitoring voice can be congured
through CPS.
2. The monitored party’s device sends voices secretly without any alert
on the interface.
3. Congure “One touch call” through CPS and send “Remote Monitor”.
Radio Check (Private call only)
Radio check is used to check whether it can communicate normally
with the other party.
1. Congure “One touch call” through CPS to send “Radio Check”.
2. After “Radio Check”is sent successfully, it will prompt a beep sound
, otherwise error tone will sound.
3. After “Radio Check” is received, there will be no interface alert, and
the device will automatically reply.
Remote Kill (Private call only)
1. Congure remote kill feature through programming software.
2. Press programmable key to execute remote kill command.
Note: The other party cannot operate normally after remote kill,
including intercom, menu operation and shutdown.
功能介绍
Features
功能介绍
Features