User's Manual

功能介绍

Features

功能介绍

Setting High/Low Power

(US Only)

Press the [Menu] key thrice to enter high/low power setting, and press

[+] or [-] key again to switch high/low power. If the radio is not operated

for 3 seconds or [PTT] key is pressed, it will exit the menu mode.

TOT (Time out Timer) Function

In order to prevent some users from occupying the same channel for a

long time, users can set to enable the TOT function. When the user's

continuous transmission time on the current channel reaches the set

time, the radio will stop transmitting and the speaker will give a time-

limit prompt tone. You can set the time out timer via programming

software. By default is 60 seconds. When OFF is selected, user can

transmit continuously.

VOICE OPERATED TRANSMISSION

(VOX)

Transmission is initiated by speaking into the microphone of the radio

instead of pushing the PTT button.VOX feature is pre-programmed on

'Program' button. Short press to on/o󰀨 VOX feature. VOX levels can be

preset through programming software. When the radio VOX function is

on, the preset VOX level is used.

- L3=High Sensitivity

- L2=Medium Sensitivity

- L1=Low Sensitivity

Features