User manual

Navigator 1641
© 2016 ... Directions Ltd
Here you can select to show the select link on the map, add it to favourites or disable it from the routing
engine. Once a link is disabled it will not be used in future route calculations.
Tap on any navigation panel on the right of the screen to change what it displays.
A screen with several option will appear. Tap one to select it.
Here you can set what type of information you want to see in the navigation panel at the right of the
screen as you drive. Possibilities are:
DST -
Distance to destination
- how far away you are in km or miles
TTA -
Time to destination
- the approximate time left before you reach your destination
ETA - Time in destination
- the approximate time you will arrive at your destination
TTM - Time to maneuver
- the approximate time before your next maneuver
ALT - Altitude, SPD - Speed, AZI - Course, SAT - Number of satellites, GPS - Position, TIM - Time and
DAT - Date
give you data about your current position and the Satellite signal.
TTW - T
i
me to the nearest waypoint
- the approximate time left before you reach the nearest waypoint
DTW - Distance to the nearest waypoint
- how far is the nearest waypoint
SPL - Speed limit
- the speed limit on the current road
Note that the number of navigation panels that is displayed can be changed in
navigation settings
.