Operation Manual

14
[Caution] Please plug the vehicle adapter after the car is started, avoiding damages to the navigator
caused the instant current at start time.
Basic Operation
Switching on/off
Please press power key on the top of the navigator to switch off when you finish application. The
system enters state of dormancy. When you switch on again, the device will maintain the operation
status last time you switch off.
Power key
[Note] If you want to save battery energy, you may switch downward the switch to cut off the main
power supply.
Restarting the system
When the system have no response, press power switch key to shut the system and restart the
system.
[Reference] The following cases may cause system failure:
1. Delay and stagnation occur while switching over images;
2. Overlong running time fails to activate the click function;
3. Pressing the power key fails to switch on/off the device.