OPERATION MANUAL 1
1.1.1. Table of contents 1.1.2. Welcome! 3 1.1.3. Important 3 1.1.4. Safety and proper usage 4 1.1.5. Introduction 6 1.1.6. Package contents 6 1.1.7. Sockets 7 1.1.8. Battery charging 7 1.1.9. Installation of a memory card 7 1.1.10. Mounting the device in a car 8 1.1.11. Car charger 8 1.1.12. Turning the device on 1.1.13. Settings 1.1.14. 2. 3. 9 9 10 1.1.15. FM Transmitter 1.1.16. Multimedia 10 10 Calibration About the device 11 11 3.1.1. GPS signal 11 3.1.
1. WELCOME! Congratulations! You have purchased the GOCLEVER NAVIO 520 Thanks to a wide range of useful features and detailed maps your travels around Poland will become easier than ever before, you will not get lost and you will save your valuable time. THE GLOBAL POSITIONING SYSTEM Global Positioning System (GPS) is a navigation system based on the satellite system composed of 24 satellites orbiting the Earth.
3. If you came into contact with leaked battery acid, Safety and proper usage rinse this place thoroughly and contact your doctor. WARNING! The lithium-ion battery, which is a part of this When you use the GOCLEVER while driving, it is device, has to be recycled and safely disposed. Do important to drive the vehicle with diligence and not dispose the waste in households or burn their attention. Never change the settings or program the on your own. navigation while driving.
2. Hit or dented casing may result in serious, irreversible damage to the device or battery. 3. NOTE! The media player, which is one of the device Charge the battery or connect the device features can only be used to play songs, to which car battery adapter, if: Battery indicator level shows you own the copyright or were purchased / significant battery exhaustion. The device turns received from the owner of such rights under the itself off, turns off immediately after it is turned on.
4. INTRODUCTION Make sure that you read all the information contained in this manual before calling the hotline service. 5.
6. Sockets We recommend you to connect the GOCLEVER NAVIO 520 to car's power supply (12V cigarette lighter) whenever you use it to ensure an adequate level of battery charge. GOCLEVER NAVIO 520 navigation system can also be charged by means of computer USB port, but we do not recommend it, since it lengthens the charging time. However, if you want to charge the device from your computer, connect the USB cable to the mini-USB port on the side of the device.
9. MOUNTING THE DEVICE IN A CAR or hi nder the operation of vehicle airbags. Place the Goclever i n a place that provides 1. Mounti ng is composed of two parts • Solder (part mounted on the windscreen with a suction cup) • Strap (connector between the navigation device and handle) the best GPS signal reception. GPS signal interference can be caused by the vicinity of other electronic equipment or by the type of the front windscreen (metalized or heated). 2.
to source of power supply, namely 12 V lighter socket, it is especially important during longer trips. The picture on page 8 shows how to install the navigation system on the front windscreen of the car. Remember that the power cord should not obstruct your view on important indicators and settings. 11. SWITCHING 12. SETTINGS Firstly, the Goclever logo screen is displayed. Remember: You don't have to go into the settings menu before running the navigation program.
14. FM TRANSMITTER • FM transmitter allows you to transfer music from your device to any FM radio receiver, e.g. car radio. The device has to be connected to the charger while you use it in the transmitter mode, because the charger cord serves as an antenna. To switch the transmitter on, connect the charger. Then, choose the transmission frequency and run the transmitter. NOTE! Avoid frequencies occupied by radio stations to prevent unwanted interference and waves overlapping. 15.
16. CALIBRATION This feature calibrates the screen of the device for precise reading of clicks. You need it only if the touch screen responds imprecisely. This screen shows your current position in degrees of latitude longitude, and altitude. The compass shows the image of satellites whose signal is received by the device, and the bar graph next to it, the strength of their signal. 17.
Your car may have the front athermic or heated windscreen and these material properties of the windscreen may also interfere the GPS signal. 19. TECHNICAL PARAMETERS TABLE FEATURE: TECHNICAL SPECIFICATIONS Processor Mstar MSB2531, 800 MHz (Cortex A7) CPU Display 5.0” 480x272 Operating system Windows CE 6.0 Expansions slot Support for microSD HC cards with a capacity of up to 8 GB GPS antenna Internal ceramic antenna Built-in speaker 2.
20. TAKING CARE OF THE GOCLEVER NAVIO 520 It is important to take care of your Goclever Navio 520 and clean it correctly. Use a soft cloth to wipe the screen of the Goclever NAVIO 520. Do not use any liquid cleaning agents or corrosive substances. If the Goclever Navio 520 gets wet, wipe it with a soft cloth. Under no circumstances should you open the housing of the GOCLEVER NAVIO 520. It may be dangerous and will void the warranty.
21. PREPARATION FOR THE START-UP In order to run GOCLEVER Maps turn on the device and select in the main menu the Navigation icon. 21.1 BASIC INFORMATION W hen you start the progra m you will see the map. You can move the map by holding and moving your finger.
Search for the address: streets, POIs, longitude/latitude, all. Volume adjustment. Quality of the GPS signal current speed, time. Calls the menu. Navigation button, the corner marked with blue colour indicates the direction of north. When you touch its menu button : Map moving button. Map angle and rotation button. Change the view to 3D. Change the view to 2D. North-direction button NOTE When you select this feature, the map will be automatically set to the north. Choose a point on the map button.
After touching the navigation button and selecting from menu point on the map: Select the point on the map. Enlarging buton, after touching the button once and after double touching its menu. Auto zoom – default view of the 3D map when navigating in cities, in undeveloped areas it automatically changes to 2D view. Close view – displaying names of streets (3D). Vicinity view – displaying names of main roads in a given town and names of cities (3D).
There are three view modes available, includi ng three which can be modified. It is not possible to change the Auto zoom view.
21.2 NAVIGATION TO A POINT The most common task of the navigation system is leading to a set point. In Goclever Maps this task is performed as follows : Clock and enter the name of the town in the right field, and the street and house num ber in the left field (you can also enter the street name alone, without enteri ng the house number).
SEARCHI NG BY 21.3 NAVIGATION MODES SET Navigation window and its description : CRITERI A Select the address you search for fro m searching results (by pressing the result ). Distance and esti mated arrival time Then select: Traffic lane assistant fro m the menu to auto matically set the route and launch the navigation proce s. After selecting w the search result will be displayed on the Distance to the next manoeuvre . map. TIP: This window displays POI phone numbers, if available.
Displaying the current GPS position on the map. The map automatically displays important POIs along the rouge, e. g. gas stations. After pressing this field, you may select the option to set the detour to this poi nt; after pressi ng the detour, it can be cancelled. IMPORTANT! The software will automatically calculate the route in the case of a wrong manoeuvre and adding a detour or intermediate points. 21.
By selecti ng you will display the console .
By selecti ng you will display console. By selecti ng the By selecti ng you will display the manoeuvre list in the current route you can display the route on the map By selecti ng options” in „Opcje trasy [Route you can make changes. Select route type the availabl e routes are fastest’ and ‘The shortest’ . ‘The Change the end poi nt to the starti ng point . Save the route as Favourite . Remove the current route.
21.4.1 CHANGE THE DESTINATION AND ADD NEW POINTS TO A ROUTE Change of the route or addition of a new po int to a route is done as follows: Launches the search window. Search the desired object like when selecting location in item 21.2 of the manual and select the Selection of location as a destination .
21.5 ROUTE SIMULATION To search for route poi nts, proceed accordi ng to item 18.2. After finding the starting point in the menu: then, after selecting the destination, select select Menu Aktualna trasa [Current route] The device will automatically calculate the route. To launch the simulation, i n the select Trasa [Route] i n the window select the butto n: The appliaction will run a route simulation.
21.6 SEARCHING FOR POIS Launches the searchi ng option, then change the upper left corner of the screen to Searchi ng for POIs is done without the need to specify the cat egories of searchi ng for an object. For instance, if you enter ‘Neste’, the search engine will call all POIs contai ning this phrase.
W hen you enter ‘Neste’ additionally entering a city, e.g. ‘Poznań’, the search engi ne will call all POIs with this phrase in a given city. The application automatically displays the notification on the most important POIs when navigating, see poi nt 21.4 of the manual. After fi nding a location/address or i ndicati ng the poi nt on the map, you can fi nd the nearest POIs.
The map has automatic searchi ng activated By pressi ng and selecti ng category, several selected ones, or use 27 we can choose from the list one to select all categories anew.
After selecting POI category, press to display POI search results.
21.7 ROUTES LOGS The application, after setti ng out the route during navigation, automatically saves the route trace. Route traces are saved for 30 days. Traces older than 30 days are automatically deleted. To view the route traces, select Menu, then Historia [History] i n Za pamiętane Trasy [Saved Routes] tab to select the presentation of the route of your choice, e.g .
The saved route can be displayed on the map, usi ng It is also possible to lock the trace against deletion, by pressi ng the icon: ; it will change to: The trace can be exported to kml file usi ng the icon.
21.8 DISPLAY MODES The Goclever Maps navigation program may operate in two display modes, in daytime and nighttime mode. The user may independently determine the program display mode, by manually setting ‘DZIENNY [DAYTIME]’ or ‘NOCNY [NIGHTTIME]’, or set the AUTOMATIC mode, in which the software will switch the display mode itself by using the internal clock of the device (mode switching time depending on the astronomical time).
21.9 FREE MAP UPDATE Every buyer of Goclever NAVIO 520 is provided with a possibility of free update of the map of Poland installed in the device (Goclever Maps) for 12 months upon purchase. Updates are usually released once a quarter. To make the update, the user must first register his/her device at http://old.goclever.com/pl/register, and then proceed according to the information placed on the site.
GOCLEVER NAVIO 520 – TERMS OF WARRANTY 1. Goclever Sp. z o.o. with its registered office in Wysogotowo near Poznań (62-081 Przeźmierowo) at ul. Skórzewska 35, hereinafter referred to as the Warrantor, assures that the GPS navigation device by GOCLEVER is free from structural and material defects that could breach its functionality, provided that the instruction manual provided when concluding the contract has been observed. 2. The warranty is binding only on the territory of Poland. 3.
not exceeding 21 business days after accepting the device for maintenance. If it is necessary to import spare parts from abroad, the above time limit may b e extended by another 30 days. 9. The complaining party is obliged to report a defect using a complaint form at rma.goclever.com. In the case of not reporting a defect and sending it to the Warrantor without obtaining a complaint number, the delivery will not be accepted for maintenance. 10.
16. The Buyer shall lose warranty rights in the case of removing warranty seals, the nameplate with the serial number, or if the manufacturer’s maintenance service observes unauthorized repairs or structural changes in the device. 17. The Warrantor may evade from keeping the timeliness of a warranty service, in the case of unforeseen circumstances with the nature of force majeure, e.g. natural disaster, social unrest etc. 18.
GOCLEVER Sp. z o.o. hereby states that GOCLEVER NAVIO 520 complies with the basic guidelines and other relevant provisions of Directive R&TTE 1999/5/EC, Directive EMC 2004/108/ EC and Directive LVD 2006/95/ EC, which was confirmed by issui ng the Statement of Compliance and placing the CE mark on the product. The full document of the Statement of Compliance is available at our website : www.goclever.com, in the tab on a given product model.
Importer: GOCLEVER Sp. z o.o. ul. Skórzewska 35 Wysogotowo (Poznań) 62-081 Przeźmierowo, POLAND, EU. www.goclever.com Helpline/Technical assistance: phone no. +48 618488767, fax: +48 616417422 serwis@goclever.
