Operation Manual

11
Installation Of The Holder Of The Navigation System
Hint: If you want to fix the holder to the wind screen, then you can skip steps 1 and 2.
 Remove the protective foil from the sticky side of the suction plate.
 Fix the suction plate to a suitable location on the dashboard. Take care, that the
surface of the dashboard is clean and press the suction plate strongly onto the
surface.
 To obtain a strong and secure hold the suction plate should not be used for 24 hours.
 Mount the car holder to the flexible neck. Note the labels on the flexible neck. The
arrow labeled CLOSE must point in the direction of the fixture. The connection closes
with a noticeable clicking sound.
 Place the holder with the suction head onto the suction plate (or directly onto the wind
screen) and press the lever on the suction head downwards. The suction head will
stick itself firmly to the suction plate.
 Place the navigation system into the car holder by placing it initially in the lower noses
and then pressing it down gently until the holder clicks in.
Holder
Cradle
Suction Cup