Operation Manual

• Illustrations
on screen display
System UI
Under this UI, click icon down the screen to enter the function page. The interface
can be switched by sliding the stylus in the screen.
• Battery status icon
FULL
When the battery is a
t low power level, please charge it immediately to ensure the
device work normally.
• Charging
1. A new battery may be empty and not charged before you get the device.
2. To achieve the best performance of the battery, it is better to charge it up
hours in the first three times, but not over 16 hours.
3. In normal charging with DC charger, please make sure to charge it for 2
hours to get it fully charged.
If the device is not used for long time, it is better to charge it to full capacit
or 3 months during storage.
• Charger
DC Charger:
Take out the DC charger, plug it into the wall outlet with AC 220V(100V ~ 240V), then
plug in the DC jack into the device DC
on screen display
Under this UI, click icon down the screen to enter the function page. The interface
can be switched by sliding the stylus in the screen.
DRAINED
t low power level, please charge it immediately to ensure the
1. A new battery may be empty and not charged before you get the device.
2. To achieve the best performance of the battery, it is better to charge it up
hours in the first three times, but not over 16 hours.
3. In normal charging with DC charger, please make sure to charge it for 2
hours to get it fully charged.
If the device is not used for long time, it is better to charge it to full capacit
or 3 months during storage.
Take out the DC charger, plug it into the wall outlet with AC 220V(100V ~ 240V), then
plug in the DC jack into the device DC
-
in jack.(see the illustration below).
5
Under this UI, click icon down the screen to enter the function page. The interface
t low power level, please charge it immediately to ensure the
1. A new battery may be empty and not charged before you get the device.
2. To achieve the best performance of the battery, it is better to charge it up
to 8
3. In normal charging with DC charger, please make sure to charge it for 2
– 2.5
If the device is not used for long time, it is better to charge it to full capacit
y every 2
Take out the DC charger, plug it into the wall outlet with AC 220V(100V ~ 240V), then
in jack.(see the illustration below).