Operation Manual

• System Resources
This i
s for checking system resources.
to check.
•
Coordinates Calibration
This is for calibrating the stylus coordinates on touch screen. On this UI, use stylus to
tap at the center of the cross, then tap on other crosses which will move after each
tapping until finish and “Touch Screen Calibration
• GPS Path
Using this function is to set GPS path for your navigation. Screen display will show as
follows:
s for checking system resources.
On this UI, click directly at the item on the right
Coordinates Calibration
This is for calibrating the stylus coordinates on touch screen. On this UI, use stylus to
tap at the center of the cross, then tap on other crosses which will move after each
tapping until finish and “Touch Screen Calibration
Completed” is shown.
Using this function is to set GPS path for your navigation. Screen display will show as
14
On this UI, click directly at the item on the right
This is for calibrating the stylus coordinates on touch screen. On this UI, use stylus to
tap at the center of the cross, then tap on other crosses which will move after each
Completed” is shown.
Using this function is to set GPS path for your navigation. Screen display will show as