Operation Manual

 Illustrations on screen display

System UI

Under this UI, click icon down the screen to enter the function page. The interface

can be switched by sliding the stylus in the screen.

 Battery status icon

FULL DRAINED

When the battery is at low power level, please charge it immediately to ensure the

device work normally.

 Charging

1. A new battery may be empty and not charged before you get the device.

2. To achieve the best performance of the battery, it is better to charge it up to 8

hours in the first three times, but not over 16 hours.

3. In normal charging with DC charger, please make sure to charge it for 2 – 2.5

hours to get it fully charged.

If the device is not used for long time, it is better to charge it to full capacity every 2

or 3 months during storage.

 Charger

DC Charger:

Take out the DC charger, plug it into the wall outlet with AC 220V(100V ~ 240V), then

plug in the DC jack into the device DC-in jack.(see the illustration below).