User Manual

Swashplate Assembly
Uniball
(H0063-S)
Uniball
(H0065-S)
Set Screw
M2.5x15mm
(HC146-S)
Linkage Rod B Assembly . . . . .x3
(Initial length for the rods from the servos to the swash plate.)
(Initial length for the rods from the swash plate to the Blade Grip.)
Linkage Rod A Assembly . . . .x2
Approx. 62.5mm
Linkage Rod M2.5x33mm
(H0237-S)
Plastic Ball Link
(H0066-S)
Linkage Rod B
Assembly
Linkage Rod A
Assembly
Socket Head Cap Screw
Shouldered M3x20mm
(HC082-S)
Socket Head Cap
Screw M2.5x12mm
(HC026-S)
Metric Hex
Nylon Nut M3
(HC206-S)
Approx. 44mm
Swashplate
Assemly
Plastic Ball Link
(H0066-S)
Swashplate
Assemly
(H0477-S)
Approx.
53.5mm
Preliminary Head Setup
Adjust the linkages as shown. You can change the tracking
without disconnecting the plastic ball links by inserting a small
tool through the rod hole and turning it.
Left Thread Right Thread
Socket Head Cap
Screw M2.5x12mm
(HC026-S)
Approx.
35mm
Plastic Ball Link
(H0066-S)
Bags 5.5, 5.6
Page 15
Chapter 8, Assembling The Modules