Installation & Operation Manual

TST-770 WSD Full Line Manual-RevA © 2021 Truck System Technologies and Pressure Systems International Inc. All Rights Reserved Worldwide.
[e-mail] [phone] M-F 9-8pm, Sat 9-2pm EST
Page 15
Power Unit Tire Position Screen
Back of TST-770 Display Internal Sensor Position is 180º from Valve Stem
AUTOMATIC CODE LEARNING
Settings Menu Screen 1
Power Unit Tire Position Screen
Power Unit or Trailer Selection Screen
Touch to enter into Automatic Code Learning settings.
Touch
to enter Sensor Code Learning settings for power unit.
Sensor Pairing Area
Touch icon. Icon will change to . Touch a sensor to the Sensor Pairing
Area on back of the display (see image above) to learn sensor ID code.
Note: For internal sensor hold the Sensor Pairing Area to the tire, at the sensor location,
which is located 180º from the valve stem (see image above).
Touch to select the tire you want to code to the sensor. Selected tire will ash
white and yellow and the
icon will appear on the screen.
180º
VALVE
STEM
INTERNAL
SENSOR
ORIENTATION
HOLD DISPLAY
TO TIRE, NEAR
SENSOR AREA
Back To TABLE OF CONTENTS