User Manual

1080P Full HD WiFi
Camera for Home Security
Operation Instruction
Catalog & Packing list
Product appearance
Quick start
Indicator light status
Product specification
Troubleshooting
After-sales service
2
3
5-13
14
14
Packing list
Product appearance
Speaker
Micro-SD card slot
Reset button
Quick start
Product specification
Item
Image resolution Max. 1920 X 1080
Camera lens Field of view: 120°
Infrared LED 12pcs IR-led 10M
Storage media Micro SD card (Up to 128GB)
Weatherproof Level IP 65
Adapter requirement 12V 1.5A
Working temperature -4°F to 140°F
Size 74*64*165(mm*mm*mm)
Specification
Status Light Definitions
Your camera has an LED light that indicates the status
of the camera. Please refer to the guide below:
Blinking blue
Connecting to the network
Blinking red
Waiting to connect to the network
Troubleshooting
If you were unable to connect your camera successfully:
Make sure that you are connecting to a 2.4GHz WPA-
PSK/WPA2-PSK WiFi network, and your network is not
hidden.
Please make sure that you entered the network name
and password correctly. Note: Both are case-sensitive.
During the QR code scan, please make sure that your
phone's display brightness is high, and avoid glare on
your phone's display.
Please make sure that your camera is not already bound to
another user account.
Make sure that you have fastened the antenna (if applicable)
onto your camera, and try moving your camera closer to the
router for the initial setup.
(Setting up multiple cameras) If you were able to connect
some, but not all of your cameras:
Power cycle the camera(s) that are not connected to the
WiFi and repeat the setup process.
Note: You can check the status light of the device to see if it has been
successfully connected to the WiFi or not. If the status light is blinking red, it
means that it has not connected to a WiFi network. If it is solid blue, it means
that it is already connected to the WiFi network.
After-sales service
Thank you very much for choosing our items. If you have any concerns
or suggestions.please feel free to contact us via:
[e-mail]
Email:
2 3 4 5
MADE IN CHINA
Model Number: GO-WIFICAM01
1.Camera*2
2.Mounting kit*2
3.Power Supply *2
4.Antenna*2
5.Operation instruction*1
Note: Please download and install App and
connect camera to the App first before mounting
camera on the wall, Getting Started , In order to
set up your device,all you need to do is:
GETIT ON
Google Play
Download on the
App Store
1.Download the free "meShare" app from Google Play
or the App Store using an Android or iOS moblie device.
Launch the app and sign up for a free account.
2.Log into the app and press the Add Device(+) icon on
the upper right corner. Power on the camera with the
supplied power adapter.
3.Select the "QR Code" connection method to connect your
device(s). Your device(s) will be added to your
"meShare"account.
4.Enter the password of the WiFi that you want your
device(s) to connect to. Please make sure that your
WiFi password is correct. Tap “Next” to proceed.
Note: The WiFi password is case-sensitive
5.Steadily hold your phone's display in front of your
GOAOFOEOIcamera until you hear “Device connected”.
The distance between your phone and the camera should
be about 8 inches. Note: If you're setting up multiple devices,
you will only need to scan the QR code with one of
your devices.
6. your device(s) and set a password for it. Tap
"Next" to proceed.Note: The password provides an
additional layer of security for your devices.
You will not need to use this password when
accessing your devices from the meShare app.
It is not required, but it is highly recommended.
8.Your device(s) have been successfully configured!
Tap “Demo” to finish. You can now share or view
your device(s).
Solid blue
Network connection successful
Note: Please download and install App and connect
camera to the App first before mounting camera on the wall.
Plug in and power on all cameras near your router for
initial setup. Fasten the antennas (if applicable) onto
the cameras.
Make sure that you have a strong WiFi connection at
*
the location of your cameras.
Make sure you know the SSID (WiFi network name)
*
and password of the 2.4GHz WPA-PSK/WPA2-PSK
WiFi network that you want your cameras to connect to.
Your network cannot be hidden.
Make sure your network has at least 1Mbps upload
*
speed for each camera when live viewing or 2Mbps
upload speed for each camera when using the cloud
service.
Download and install the “meShare” app from
*
Google Play or the App Store (compatibility:
iOS 9.0+ or Android 4.0+). Launch the app
and sign up for a free maShare account.
All of your devices will be bound to this account.
(Scan the QR code shown
on the right when
prompted by the App)
6 7 8
9 10 11 13
14 15 16
Network settings
4
Network settings
12
15
16
9. If there is a suspicious motion, an alert will be generated
immediately and automatically save snapshots and videos
to micro SD card or cloud storage.
IR - LEDs
Microphone
Lens
Smart IR- cut
Indicator light
Start Free Trial
Demo
Free Trial available
F
re
e Tria
l
A
vail
ab
l
e
7.meShare provides 30-day Free Trial, 24/7 continuous
recording on cloud. You can choose to subscribe for
the service or not after the trial ends. Motion video clips
from the past 12 hours are saved freely on cloud even
without the subscription.