User Manual

8 9
Charge Times
Wall Charger (72W) 5 Hrs
Car Charger (30W) 13 Hrs
Goal Zero Nomad 20 40-80 Hrs
2x Goal Zero Nomad 20’s 20-40 Hrs
Goal Zero Boulder 30 26-52 Hrs
Goal Zero Nomad 100 8-16 Hrs
Battery
Cell Type AGM Lead Acid
Pack Capacity 396Wh (12V, 33Ah)
Lifecycles Hundreds of cycles
Shelf-life Keep plugged in or charge every 3 months
Fuses None
Management System Charging and low-battery protection built-in
Ports
USB Port (output) 5V, up to 2.1A (10.5W max), regulated
6mm Port
(output, 6mm, green, hexagon)
12V, up to 10A (120W max)
12V Car Port (output) 12V, up to 10A (120W max)
110V AC Unit Inverter
(output, 60Hz, pure-sine wave)
110V, 2.6A (300W continuous, 600W surge max)
220V AC Unit Inverter
(output, 50Hz, pure-sine wave)
UNIVERSAL OR AUSTRALIA TYPE  AC PLUGS
220V, 1.4A (300W continuous, 600W surge max)
Power Pole Chaining Port 12V, up to 33A (400W max)
Charging Port
(input, 8mm, blue, circle)
14-29V, up to 10A (120W max)
General
Chainable Yes
Weight 29 lbs (13.2 kg)
Dimensions 10.25 x 8 x 8 in (26 x 20.3 x 20.3 cm)
Operating Usage Temp. 32-104 F (0-40 C)
Certs
Warranty 12 Months
Chaining your Yeti:
You can chain your YETI to other YETI 400s to extend runtimes. To chain to
other YETI 400s:
1. Purchase the Anderson Chaining Cable from www.GOALZERO.com
2. Insert the cable connectors into the Anderson PowerPole ports on
the side of each Yeti 400.
3. Make sure both YETIs are completely charged BEFORE chaining.
When additional batteries are chained to the YETI, you will experience
increased charge times – this is a result of having to charge up the chained
batteries in addition to the YETI.
**The YETI 400 is NOT chainable with the YETI 1250 – the internal
batteries are not the same size. You can chain the YETI 400 to the
discontinued EXTREME 350 Power Pack.
Technical Specifications