Other Content

4 5
Charging Your YETI
Charging from the Wall
Using the included AC Wall Charger, plug your YETI into any wall outlet. You will know
the Yeti is charging when the blue LED light next to the INPUT port turns on, and
battery segments in the BATTERY DISPLAY are blinking. The YETI is fully charged
when all battery segments stop blinking and remain solid. The YETI should recharge
from the wall in about 6 hours.
Charging from your Car
Although not recommended because of slow charge times, you can charge
your YETI from any 12V source, like your car. To charge your YETI from a car
or 12V source, you will need to purchase an 8.0 mm to 12V charger from
GOALZERO.com. Call our Customer Solutions Center at 1-888-794-6250
for help identifying the charger.
CHARGE ME NOW: Before using or storing, plug your YETI into the wall until it is
fully charged. If at any point you hear a beeping from your YETI, plug it into a power
source, like an AC outlet or a solar panel, as soon as possible. This built-in warning
indicator is to help prevent battery damage when the charge gets low. For more tips
and tricks on keeping your battery healthy, see the BATTERY 101 section.
LCD Battery Display: The LCD Battery Display indicates the charge level of your
YETI. There are 5 segments to the battery, approximating 20% - 40% - 60% - 80%
-100% capacity. As you use your YETI, segments will disappear from the display,
indicating the remaining charge. When charging your YETI you will notice a battery
segment blinking at a 1 second interval. This indicates the current charge status.
Once your YETI is fully charged, all battery segments will be lit and remain solid.
Charging from Solar
1. Place your solar panel where it will get as much direct sunlight as
possible. See the graphic in the SOLAR 101 section for help.
2. Insert the blue-ringed plug into the INPUT port on the front of the
YETI. You will know the YETI is charging when the blue LED light next to
the INPUT port lights up, and the battery segments in the LCD BATTERY
DISPLAY are blinking. The YETI is fully charged when all battery
segments stop blinking and remain solid.
3. Your YETI is capable of taking in up to 60W of solar power. Some
GOAL ZERO panels are chainable to provide more power to your YETI
and reduce solar charge times.
When connecting older versions of the NOMAD and BOULDER Solar Panels, use
the Legacy-Nomad Adapter Cable to connect to the YETI.
NOMAD 20
Solar Panel
GOAL ZERO YETI 150
Solar Generator
LAPTOP
2 Recharges17 Hours
Full Sun
6 Hours 2 Recharges
GOAL ZERO YETI 150
Solar Generator
LAPTOP
1. The AC wall charger comes in two
pieces. Connect the two pieces by
plugging the cable into the box