DVD Recorder+VCR VR3840 User's Guide
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user.
Table of Contents INTRODUCTION Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 6-10 Recordable Discs . . . . . . . . . . . . . . . . . . . . . . . 6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disc Related Terms. . . . . . . . . . . . . . . . . . . . . . 7 • Types of Video CDs . . . . . . . . . . . . . . . . . . 7 • What is “DoMiNoFX”? . . . . . . . . . . . . . . . . 7 About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . 7 • About the Symbol . . . . . . . . . .
Table of Contents RECORDING Basic Recording . . . . . . . . . . . . . . . . . . . . . 42-43 Recording from TV . . . . . . . . . . . . . . . . . . . . . 42 One Touch Record (OTR) . . . . . . . . . . . . . . . . 42 EDITING Title List and Chapter List Menu . . . . . . . . 46-53 Using the Title List-Original menu (VR) . . . . . 46 Using the Chapter List-Original menu (VR) . . . 46 Using the Title List-Playlist Menu (VR) . . . . . . 47 Using the Chapter List-Playlist Menu (VR). . . .
Overview Recordable Discs DVD-RW (DVD - ReWritable): These discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the same disc. DVD-R (DVD - Recordable): These discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it. otes • The DVD Recorder+VCR cannot record on CD-R or CD-RW discs.
Overview (Continued) Disc Related Terms About Symbols Title (DVD only) The main film content or accompanying feature content or music album. Each title is assigned a title reference number enabling you to locate it easily. About the Track (Video CD and Audio CD only) Sections of a picture or a musical piece on a video CD or an audio CD. Each track is assigned a number, enabling you to easily locate the track you want.
Overview (Continued) About DVD-R and DVD-RW discs Is Editing a DVD like Editing a Videotape? How are DVD-R and DVD-RW discs different? DVD-R is a record-once medium, while DVD-RW is a re-recordable/erasable medium. You can re-record/ erase an RW disc approximately 1,000 times. No. When you edit a videotape you need one video deck to play the original tape and another to record the edits. With DVD, you edit by making a “Playlist” of what to play and when to play it.
Notes for Recording Restrictions on Video Recording • The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. • If you record still pictures or audio only, the recording time may be longer.
Overview (Continued) Precautions Handling the unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
Front Panel Overview DVD EJECT (Z) Opens or closes the disc tray. VCR EJECT Ejects the tape in the VCR deck. INTRODUCTION POWER button and indicator Switches the DVD Recorder+VCR ON and OFF. Lights green when the DVD Recorder+VCR is turned on. Cassette Compartment (VCR deck) Insert a video cassette here. SELECT DVD/VCR Toggles control between the DVD deck and the VCR deck. Disc Tray (DVD deck) Insert a disc here. Front Panel Display Shows the current status of the DVD Recorder+VCR.
Front Panel Display Overview Disc Type indicators Indicates the type of disc loaded. Indicates that a timer recording is in progress or is programmed. REC Indicates that a recording is in progress. PRG Indicates that program playback is active. TTL Indicates current title number. Indicates a disc is inserted in the DVD deck. Indicates a VHS tape is inserted in the VCR deck. Indicates a DVD-RW disc (VR mode only) is inserted in the DVD deck. CHP/TRK Indicates the current chapter or track number.
Remote Control Overview POWER EJECT Turns DVD Recorder+VCR on and off. COPY Switches between the DVD Recorder+VCR tuner and your TV tuner. Copies DVD to VCR (or VCR to DVD). DVD CLEAR Selects DVD mode. VCR Selects VCR mode. INPUT Switches the DVD Recorder+VCR input to Tuner, AV1, or AV2. EJECT POWER TITLE TV/VCR DVD VCR 1 2 3 CLEAR Selects numbered options in menus. Selects TV channels.
Rear Panel Overview RF IN (FROM ANT.) Connect to your antenna or cable TV outlet. AV 1 IN (VIDEO, L-AUDIO-R) Connect to the audio/video output of an external source (VCR, Camcorder, etc.). AV OUT (VIDEO, L-AUDIO-R) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component (Y Pb Pr) inputs. AUDIO OUT (L, R) Connect to a TV or other equipment with audio inputs. COAXIAL (Digital Audio Out) Connect to an amplifier with a coaxial digital audio input.
Connections Caution – Make sure the DVD Recorder+VCR is connected directly to the TV, and the TV is set to the correct video input. – Do not connect the DVD Recorder+VCR’s AUDIO OUT jack to the phono in jack (record deck) of your audio system. – Do not connect the DVD Recorder+VCR via your VCR. The DVD image could be distorted by the copy protection system.
Connections (Continued) Connecting a TV S-Video Connection Choose one of the following TV connections, depending on the capabilities of your equipment. 1 ote All video signals are available from all video outputs. That means that whichever TV connection you use, it will work with all input sources, including VHS out of the Component/Progressive Video Output.
Connections (Continued) CONNECTIONS & SETUP Connecting an Amplifier/Receiver Rear of DVD Recorder+VCR Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A).
Connections (Continued) Connecting Optional Equipment Connect the AV 1 IN or AV 2 IN jacks on the DVD Recorder+VCR to the audio/video out jacks on your external component, using optional audio/video cables. ote If you use the S-VIDEO jack on the front panel, there will be no signal output from the front panel VIDEO jack.
Setup Menu Overview The DVD Recorder+VCR Setup menu includes system settings in six categories GENERAL, LANGUAGE, AUDIO, LOCK, RECORD and DISC. Press SETUP on the remote control to view the first and second levels of the Setup menu, and press B to display the third level . You will see the “B” symbol on the right side of the menu label whenever additional levels are available. Tuning Band TV Auto Channel Set CATV CH. Add/Del Clock Set TV Aspect Progressive Scan Factory Setting Prev.
Initial Setup (Continued) Channel Add/Delete This feature allows you to manually add or delete channels from your channel list. 5 Press B to move to the third level. v / V to select the Auto option then press 6 Use ENTER. The Auto option is set at the factory. In the Auto option, the DVD Recorder+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. steps 1-3 as shown under Auto Channel 1 Follow Set.
TV Aspect Factory Setting 4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Fullscreen: Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 16:9 Widescreen: Select when a 16:9 widescreen TV is connected. If you wish, you can reset the DVD Recorder+VCR to its original factory settings. Select “SET” then press ENTER.
Initial Setup (Continued) Sampling Frequency AUDIO Settings Each DVD disc has a variety of audio output options. Set the DVD Recorder+VCR’s Audio Output according to the type of audio system you use. Dolby Digital PCM: Select when connected to a 2-channel digital stereo amplifier. The DVD Recorder+VCR’s digital audio signal will be output in the PCM 2ch format when you play a DVD recorded with a Dolby Digital soundtrack.
LOCK Settings Password Movie Rating Changing the 4-digit code The Lock feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. 1 Follow steps 1-3 as shown under Movie Rating. 2 Use v / V to select the Set Password option. Movie Rating Set Password Country Code Prev. Movie Rating No Limit 8(Adult) 7 6 5 4 3 2 1(Kids) Select Set Password Country Code 0-9 Input Close Press SETUP. The Setup menu appears.
Initial Setup (Continued) Country Code RECORD Settings Enter the 2-letter code for the country/area whose standards were used to rate your DVDs, referring to the “Country Code List” on page 56. Disc Record Mode Movie Rating You can set the default DVD recording quality to: XP (1 hr/disc), SP (2 hrs/disc), LP (4 hrs/disc), or EP (6 hrs/disc) Set Password Country Code U S Disc Record Mode XP VCR Record Mode SP Auto Chapter LP EP Prev. Select Close SETUP. 1 Press The Setup menu appears.
Auto Chapter DISC Settings During recording, chapter markers are added automatically at fixed intervals. You can set this interval to 5 minutes or 10 minutes. To turn off automatic chapter marking, select “OFF”. Disc Initialize Disc Record Mode VCR Record Mode DV Record Audio Auto Chapter OFF When you load a blank disc, the recorder will initialize the disc. DVD-R: The recorder initializes the disc in Video mode. The Record mode will always be Video mode.
Initial Setup (Continued) Disc Finalize Disc Protect Finalizing a recordable disc ‘locks’ its recordings in place so the disc can be played on most standard DVD players or computers equipped with DVD-ROM drives. Finalizing a disc formatted in Video mode will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing DISC MENU/LIST or TITLE.
ENTER. 4 Press The Keyboard menu appears. AutoPlay When you load a DVD with AutoPlay turned on, the DVD Recorder+VCR will bypass the Disc menu and trailers and start playing the movie automatically. Set AutoPlay to ON or OFF. Disc Initialize Disc Finalize Disc Label DVD-VR Language English/Latin Capital 1 2 3 4 5 6 7 8 9 A B C D E F G H I 0 J K L M N O P Q R S T U V W X Y Z Disc Protect PBC Space Delete AutoPlay OFF YourDVD ON Prev.
Initial Setup (Continued) On-Screen Display Overview The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press the DISPLAY button. Displaying Disc Information To display information about the currently loaded disc or tape: On-screen display operation Press DISPLAY repeatedly to display/change the information displayed on-screen.
OSD Menu Options by Media Type DVD Shows the elapsed playing time and total time. Shows the current title/chapter number and total number of titles/chapters Title Chapter: 3/28 Menu Options 1/6 Chapter number 4/26 Time search - : -- : -- Audio language and Digital Audio Output mode Subtitle language 1. ABC Angle Sound 5.1CH ENG OFF 1/3 NORMAL b / B, or 0-9, ENTER Shows the current chapter number and total number of chapters, and skips to the desired chapter number.
Initial Setup (Continued) OSD Menu Options by Media Type (Continued) Shows the elapsed playing time and total time. Video Shows the title name, recording date, recording mode, etc. 01/02/03 Menu Options LP Shows the current mode.
DVD/VCD Playback Playback Setup Press the DVD button to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. 1 Press EJECT to open the disc tray. your disc in the tray with the 2 Load playback side down. EJECT to close the tray. 3 Press READING appears on the front panel display, and playback starts automatically.
DVD/VCD Playback (Continued) Playing a DVD/Video CD VR VCD 1 Press PAUSE/STEP (X) during playback. The DVD Recorder+VCR will go into Pause mode. 2 You can back up or advance the picture frame-byframe by pressing b / B repeatedly during Pause mode. ote Frame-by-frame reverse playback is not available on Video CDs. Search DVD Video VR VCD CHAPTER Still Picture and Frame-by-Frame Playback Video DVD REPEAT (Continued) DVD Repeat Video VR VCD 1 Press REW (m) or FF (M) during playback.
DVD/VCD Playback (Continued) Playing a DVD/Video CD The Marker Search menu will appear on the TV screen. DVD Video VR Marker Search PLAYBACK (Continued) Time Search To Recall a Marked Scene 1 During disc playback, press SEARCH. - : -- : -- The Time Search function allows you to start playback from any chosen time on the disc. 1 Press DISPLAY during playback. The on-screen display appears on the TV screen. The Time Search box shows the elapsed playing time of the current disc.
DVD/VCD Playback (Continued) Playing a DVD/Video CD Subtitles (Continued) Camera Angle DVD DVD ABC OFF Press SUBTITLE then press b / B repeatedly during playback to select among all available subtitle languages. 1/3 If a DVD contains scenes recorded at different camera angles, you can select among these angles during playback. Press ANGLE then press b / B repeatedly during playback to select the desired angle.
Audio CD and MP3/WMA Operation The DVD Recorder+VCR can play audio CDs and MP3/WMA files on CD-ROM, CD-R,CD-RW, or DVD-R/RW discs. Before playing MP3/WMA files, read “Notes on MP3/WMA Recordings” on page 36.
Audio CD and MP3/WMA Operation (Continued) Pause CD MP3 WMA Repeat A-B CD 1 Press PAUSE/STEP (X) during playback. To repeat a sequence in a track: 2 To return to playback, press PAUSE/STEP (X) again. 1 Press A-B at your chosen start point. The Repeat icon and “A-” appear on the menu screen. Skip Tracks CD MP3 2 Press A-B again at your chosen end point. The Repeat icon and “A - B” appear on the menu screen, and the repeat sequence begins. WMA Press PREV (.
Program Playback with Audio CD and MP3/WMA v / V to select the track you want to start 6 Use playing. 7 Press PLAY (N) to start. Playback begins in the order in the programmed order and “PRG” appears on the front panel display. Playback stops after playing the last programmed track in the program list. Insert an Audio CD or MP3/WMA disc. 1 v V to select a track or folder on the list 2 Use then press ENTER. The options appear on the left side of the menu. The Music menu will appear.
Program Playback with Audio CD and MP3/WMA (Continued) Repeating Programmed Tracks Changing Track Order Press REPEAT to select the desired Repeat mode. • TRACK : Repeats the current track. • ALL : Repeats all the tracks in the program list • OFF: Cancels Repeat mode (no display). 1 Select the track you wish to move on the Program List then press ENTER. The options appear on the left side of the menu. Erasing a Track 1 Select the track that you wish to erase from the Program List then press ENTER.
JPEG Disc Operation Viewing a JPEG File JPEG v / V to select “Full Screen” then press 4 Use ENTER. 1 PLAYBACK The DVD Recorder+VCR can play discs with JPEG files. Before playing JPEG recordings, read “Notes on JPEG Recordings” on page 40. Insert a disc and close the tray. The Photo-CD menu appears on the TV screen. File 03.
JPEG Disc Operation Still Picture Notes on JPEG Recordings Press PAUSE/STEP (X) during a Slide Show to pause playback. Depending on the size and number of JPEG files, it may take several minutes for the recorder to read the disc’s content. If you don’t see an on-screen display after several minutes, some of the files are too big — reduce the resolution of the JPEG files to less than 4 megapixels and burn another disc.
VCR Playback Special Playback Features Press the VCR button to set the remote control to operate the VCR deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. Playing a VHS Tape VHS Preparation: Turn on the TV. Tune the TV to the DVD Recorder+VCR output channel (CH 3 or 4) or select the video input connected to the DVD Recorder+VCR.
Basic Recording Recording from TV One Touch Record (OTR) Follow the instructions below to record a TV program. One Touch Recording allows you add recording time in fixed increments at the touch of a button. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. • If you load a blank DVD-RW disc, you will be prompted to set the Disc Record mode.
One Touch Copy - DVD to VHS One Touch Copy - VHS to DVD You can copy the contents of a DVD to a VHS tape using the COPY button. You can copy the contents of a VHS tape to a recordable DVD using the COPY button. This allows you to archive your old VHS tapes to DVD. ote If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. “Copy-protected. Cannot record.” is displayed on the TV screen.
Timer Recording The Timer Recording function allows you to record up to 8 programs within a period of one month. 1 Press TIMER RECORD. The Timer Record menu appears. Timer Record Media DVD OK Ch. Ch.11 SP 198 min Free Date Start Time End Time Mode 10/16 Thu 10:07 AM 11:00 AM SP TIMER REC Timer Rec List Close • Media – Choose the desired media (DVD or VCR). • Ch. – Choose the desired channel, or one of the external inputs from which to record.
Recording from External Components About Playing Recordings on Other You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs. DVD Players 1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see page 18. INPUT repeatedly to select the external 2 Press input to record from.
Title List and Chapter List Menu Using the Title List-Original menu VR The Title List-Original is where you build and edit your Playlist, and where you can delete titles and make other changes to the Original content of the disc. You can also play individual titles directly from the Title ListOriginal menu. 1 Press DISC MENU/LIST repeatedly to display the Title List-Original menu. • Use the v/V buttons to display the previous/next page if there are more than 6 titles or chapters.
Title List and Chapter List Menu (Continued) 1 VR Press DISC MENU/LIST repeatedly to display the Title List-Playlist menu. • Use the v/V buttons to display the previous/next page if there are more than 6 titles or chapters. • To exit the Title List-Playlist menu, press RETURN (O). 1/2 Title List Playlist TITLE 1 10/12 0:25:20 TITLE 2 10/14 Using the Chapter List-Playlist Menu VR DISC MENU/LIST repeatedly to display the 1 Press Title List-Playlist menu.
Title List and Chapter List Menu (Continued) Using the Title List menu Video From the Title List display you can play, name and erase titles. Once a Video mode disc is finalized, the Title List screen changes its appearance and all you can do is select titles to play. 1 Press DISC MENU/LIST to display the Title List. Title List 1/3 Title DVD VIDEO 1hour 57min SP Free TITLE 1 Date 1/ 3 Duration 0:02:01 TITLE 2 1/ 3 0:06:21 TITLE 3 4/ 12 0:52:31 Select DISPLAY Info.
Title and Chapter Editing About Original vs. Playlist Content Adding Chapter Markers VR Chapter Edits you make to the Original content of a DVD-RW disc in VR mode change the actual content of the disc. For example, if you delete a title or chapter from the Original content, that title or chapter is deleted from the disc, freeing up extra recording time. When you edit a Playlist, however, you are not changing the content of the disc.
Title and Chapter Editing (Continued) Making a New Playlist VR Use this function to add an Original title or chapter to a Playlist. When you do this, the whole title is put into the Playlist (you can even delete parts you don’t want later — see “Deleting Titles/Chapters” on page 51). The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you add more chapter markers to the Original later, these are not automatically copied over into the Playlist title.
Title and Chapter Editing (Continued) VR When you erase a title or chapter from the Playlist menu on DVD-RW discs formatted in VR mode, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to delete a title or chapter from the Title List or Chapter List menu, the title or chapter is actually deleted from the disc and the remaining time available for recording increases. Titles/chapters deleted from the Original are also removed from the Playlist.
Title and Chapter Editing (Continued) Renaming a Title VR Combining Two Chapters Video You can name Original and Playlist titles independently. 1 On the Title List menu, use v V b B to choose the title you want to name then press ENTER. Options appear on the left side of the menu. 1 Use v/V to select the ‘Rename’ option then 2 press ENTER. The Keyboard menu appears.
Title and Chapter Editing (Continued) VR Use this function to re-arrange the playback order of Playlist chapters on the Title List-Playlist menu. 1 Press DISC MENU/LIST repeatedly to display Title List-Playlist menu. To display the Chapter List-Playlist menu, refer to “Using the Chapter List-Playlist Menu” on page 47. ote This function is not available if there is only one chapter.
Programming the MultiBrand Remote to Control Your TV You can program the DVD Recorder+VCR MultiBrand remote control to operate many TV brands and models. below, find the code(s) correspon1 Indingthetochart your brand of TV. holding down the TV POWER button, 2 While enter the 2-digit code number using the 0-9 buttons. 3 If your TV powers off or on, programming is complete. If not, repeat step 2 using the next code listed for your brand of TV.
Language Code List Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Amharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili
Country Code List Use this list to enter the appropriate code number for the “Country Code” setting; see page 24.
Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Solution The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. The TV is not set to receive DVD Recorder+VCR signal output. Select the appropriate video input on the TV so the picture from the DVD Recorder+VCR appears on the TV screen. The video cable is not connected securely. Connect the video cable securely.
Troubleshooting (Continued) Cause Symptom Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. Solution The remaining blank space on the disc is insufficient. Use another disc. The source you are trying to record is copyprotected. You cannot record the source. When setting the recording channel, the channel is tuned on the TV’s own tuner.
Technical Specifications General AC 120V, 60 Hz 35W 430 X 78.5 X 354 mm (16.9 x 3.1 x 13.9 inches) (w x h x d) 5.6 kg (12.3 lbs) 5˚C to 35˚C (41˚F to 95˚F) 5 % to 90 % NTSC REFERENCE Power requirements Power consumption Dimensions (approx.) Mass (approx.
Technical Specifications (Continued) Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) RF OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1 (C) 0.286 V (p-p) 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 0.5 V (p-p), 75 Ω, RCA jack x 1 Optical connector x 1 1.
Who Provides the Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. Remote controls are warrantied for 90 days from the date of purchase. Who is Protected This warranty protects the original consumer owner of this GoVideo product.
3834RV0011D Printed in Korea