Owners manual

Step-6 Attach the passenger side step to each of the brackets using (2) 5/16” x 1” hex bolts, (2) 5/16” lock
washers and (2) 3/8” flat washers, (Illustration 1 & 2).
Step-7 Align the side step with the vehicle and tighten all side step and bracket nuts and bolts.
Step-8 Repeat the installation steps to install the driver side brackets and side step. Remember to check
and retighten all nuts and bolts periodically.
Passenger
Side Front
Illustration 1
Illustration 2
Page 4