Owners manual

ManualsBrandsGO RHINO ManualsAutomotiveGo Rhino D24205T Dominator D2 SideSteps Fits 15-18 1500

Item Qty. Code Max. Torque Qty.

1 1 Set

D24105D-P

- 1

1 D36247TK HARDWARE BRACKETS KIT INCLUDES: - 1

2 1 Set D09 -

3 2 Set D07 -

4 6 Piece 372240BA 3/8" Bolt plate 30 Lb.Ft

1 KTE-D36247 HARDWARE BOLTS KIT INCLUDES: -

5 12 Piece - M8 x 25mm Hex head bolt 30 Lb.Ft

6 12 Piece - 5/16" Flat washer -

7 12 Piece - 5/16" Lock washer -

8 24 Piece - 3/8 x 1 1/4" Hex head bolt 30 Lb.Ft

16 Piece

3/8" hex nut

30 Lb.Ft

40 Piece

3/8" Flat washer

28 Piece

3/8" Lock washer

6 Piece

Vinyl Gasket

Dominator D2 Side Step Driver & Passenger

9/16" Socket & Wrench

13mm Socket & Wrench

Description Description

D24205(T-PS)

INSTALLATION INSTRUCTIONS

DODGE RAM 1500 Crew Cab

2015

2016

Parts List Required Tools (Not included)

Ratchet

Center & Rear bracket

Front bracket

Ratchet extension

Product Image

Instructions

Do not attempt to install this product on any vehicle other than the one it is designed for and listed above!

1. Before beginning the installation, please read all directions carefully and verify that all necessary hardware is accounted for. If any

parts are missing, stop the installation and contact your distributor immediately.

2. To maintain and care this product, keep it clean and do not use abrasive cleaners or polish waxes. We recommend to use only

automotive wax such as pure carnauba to avoid scratches and rust.

3. The approximate installation time is 60 min.

4. This installation uses 3 brackets per side, (Photo 1).

FRONT

BRACKET

REAR

BRACKET

2 3

Front Driver

Passenger

Driver

CENTER

BRACKET

PHOTO 1

FRONT

BRACKET

REAR

BRACKET

CENTER

BRACKET

Center & Rear Driver

Rear

DESIGN QUALITY FOD17.003.E REVISION DATE: 7-14-2016 PAGE 1/3

Summary of content (3 pages)

PAGE 1
INSTALLATION INSTRUCTIONS D24205(T-PS) 2015 2016 DODGE RAM 1500 Crew Cab Parts List Description Item 1 Qty. 1 Set Code Max. Torque - D24105D-P Dominator D2 Side Step Driver & Passenger 2 3 4 1 1 Set 2 Set 6 Piece D36247TK D09 D07 372240BA HARDWARE BRACKETS KIT INCLUDES: Front bracket Center & Rear bracket 3/8" Bolt plate 30 Lb.
PAGE 2
Front Bracket. 5. Begin the installation on the driver side of the vehicle. 6. If the vehicle has (2) hexagon shaped holes in the rocker panel at the front of the cab, remove the tape covering the obround hole in the rocker panel, and install (1) 3/8” T-Plate in the rocker panel and install (1) vinyl gasket over the threads to prevent the T-Plate from falling into the body, (Photo 2).
PAGE 3
Center & Rear Bracket 9. If the vehicle has M8 threaded inserts in the rocker panel at the center and rear of the cab, remove the tape covering the obround hole in the rocker panel, and install (1) 3/8” T-Plate in the oblong hole in the rocker panel and install (1) vinyl gasket over the threads to prevent the T-Plate from falling into the body, (Photo 8).