Installation Guide

8
REV.02
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
STEP # 4.1
• Drill 17/32” holes through top side of
bed rails.
• Apply automotive primer to any
exposed metal.
• Hand tighten Rivet nut, Item 26 to Rivet
Nut Install Tool, Item 25.
• Insert Rivet Nut into 17/32” hole.
• Hold spacer with ¾” wrench.
• Tighten bolt with 9/16” wrench or
socket and ratchet, this will compress
the rivet nut.
• Once tight, unscrew the bolt and rivet
nut will be installed.