Owners manual

9.-Access the stake pocket through the opening in the bed, and position the nut plate on the bottom
of the stake pocket. Do not tighten. PHOTO # 7
10.- Align the nut plate with the 3/8” bolt previously installed in the bed bracket. Using a socket and
extension, thread the 3/8” bolt into the nut plate, and secure the bed bracket to the stake pocket.
Do not tighten. PHOTO # 8
10.- Using a utility knife, cut and remove the outlined area of the bed cap to expose the front stake
pocket opening. Do not tighten. PHOTO # 9
11.-Assemble (1) 3/8” x 2” button head bolt, nylon washer and thread nut plate in the hole at the end
of the bed rail. Do not tighten. PHOTO # 10
12.- Position the ends of the thread plate under the lip of the stake pocket opening, and finger tighten
the bolt. Do not tighten. PHOTO # 11
13.-Attach the opposite end of the bed rail to the rear bed rail bracket using (1) 3/8” x 2” button head
bolt and nylon washer. Do not tighten. PHOTO # 12
DESING QUALITY FODI.003.E PAGE. 3/4
FOTO 8
FOTO 8FOTO 8
FOTO 8
FOTO 7
FOTO 7FOTO 7
FOTO 7
FOTO 9
FOTO 9FOTO 9
FOTO 9
FOTO 10
FOTO 10FOTO 10
FOTO 10
FOTO 11
FOTO 11FOTO 11
FOTO 11
FOTO 12
FOTO 12FOTO 12
FOTO 12