Manualshelf

Owners manual

ManualsBrandsGO RHINO ManualsAutomotiveGo Rhino 701132T Trailline Fender Fits 07-18 Wrangler Wrangler (JK)
12345678910
6
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Step-3 Assemble the Nut-Sert, flat washer, bearing, flat washer, bolt and nut, (ILLUSTRATION 2).
Step-4 Insert the assembly into the re-drilled hole. Use a 7/16” wrench to hold the nut, and tighten the
bolt using a 7/16” wrench or socket and ratchet. Continue tightening the bolt until the Nut-Sert is fully
compressed and no longer spins. Remove the bolt, nut and washers. Install a nut-sert into each of the
remaining holes that were re-drilled, (ILLUSTRATION 3).
ILLUSTRATION 2
ILLUSTRATION 3
F
F
F
F
F
F
F