Owners manual

REV.01

INSTALLATION INSTRUCTIONS

If you need installation service for your new product, call the authorized distributor from whom you purchased the

product or an authorized installation service company which can be found by calling toll free 1-888-427-4466

1 1/2 Hour

TOOLS NEEDED FOR INSTALLATION:

• 7/16” Socket & Wrench, Ratchet & Ratchet Extension

• Clip Removal Tool , or Flat Blade Screw Driver

• 5/32” Hex Key

• Drill Motor & 25/64” Drill Bit

ESTIMATED TIME FOR INSTALLATION:

PARTS INCLUDED IN THIS LIST:

Go Rhino recommends you, the installer, read this installation instruction manual from front to back before

installing the product. You may also click here to view an installation video or visit

http://www.gorhino.com/Installation-Videos.

ITEM QTY. DESCRIPTION ITEM QTY. DESCRIPTION

A 8 1/4" x 3/4" Button Head Bolt G 1 Passenger / Auxilliary Bracket

B 22 1/4" x1" Hex Bolt H 1 Passenger / Trail Line Rear Fender

C 18 1/4" Lock Washer I 1 Passenger / Fender Liner

D 30 1/4" Flat Washer J 1 Driver / Auxilliary Bracket (Not Shown)

E 4 1/4" Nylon Locking Hex Nut K 1 Driver / Trail Line Rear Fender (Not Shown)

F 18 1/4" Nut-Sert L 1 Driver / Fender Liner (Not Shown)

1 Nut-Sert Installation Tool (Not Shown)