Owners manual

9
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Step-3 With assistance position the Trailline fender up to vehicle and align the attachment holes in the
Trailline fender with the holes in the vehicle body used for attachment of the OEM fender. Use the holes
in the Trailline fender as a guide and mark the location of the (2) holes to be drilled in the vehicle body
for attachment of the auxiliary bracket and (1) additional hole for attachment of the support bracket,
(ILLUSTRATION 2).
ILLUSTRATION 2
Location of holes to be
drilled in the vehicle body
for the auxiliary bracket
and support bracket
J