Owners manual

REV.01

INSTALLATION INSTRUCTIONS

Step-4 Using a 10mm socket and ratchet, remove the (4) bolts from the center of the wheel well area

securing the OEM fender to the vehicle, (ILLUSTRATION 4). Retain (3) of the bolts as they will be used

for attachment of the Trailline fender support bracket.

ILLUSTRATION 4

Step-5 After you've removed the OEM fender clip fastener and bolts, grab the fender, lift it up and pull

outward from side to side while wiggling it. Continue to do so gently until it comes off. Remove any

plastic clips that may have broken off and remain in the holes on the vehicle body.