Owners manual

17
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Step-11 Attach the Trailline fender and auxiliary bracket to the vehicle body panel using (2) ¼” x 1”
hex bolts, (2) ¼” flat washers, and (2) ¼” locking hex nuts , (ILLUSTRATION 10).
ILLUSTRATION 10
B
D
E
I
J
Step-12 Attach the remaining holes in the Trailline fender to the vehicle body panel using the
supplied ¼” x 1” hex bolts, flat washers and locking hex nuts.
Step-13 Tighten all nuts and bolts securing the Trailline fender, support bracket and auxiliary bracket
to the vehicle.
Step-14 Reconnect the wiring harness to the side marker light