Owners manual

Step-7
Locate the hole in the bottom of the frame and install ( 1 ) 1/2" t-bolt,
( Photo 13 ).
Attach
the driver side lower bracket to the frame using the t-bolt, ( 1 ) 1/2" flat washer, ( 1 ) 1/2" lock
washer
and ( 1 ) 1/2" hex nut, and to the Grille Guard using ( 1 ) 1/2" x 1 1/2" hex bolt, ( 1 ) 1/2"
flat washer, ( 1 ) 1/2" lock washer and ( 1 ) 1/2" hex nut.
( Photo 14 ).
Repeat to install the
passenger side lower bracket.
Step-8
Align the Grille Guard with the vehicle and tighten all factory and supplied nuts and bolts.
Step-9
If your state law requires a front license plate, attach the supplied bracket to the upper
set of holes in the vehicle bracket using the factory license plate attachment screws. Atach the
license plate to the supplied bracket using (2) 1/4 x 3/4" hex bolt and (2) 1/4" hex nuts.
( Photo
15 )
Remember to check and retighten the nuts and bolts avery six months.
# 13
Driver side
# 14
Driver side
2016 model
2014 - 2015 model
Picture may not represent the actual product
DESIGN QUALITY FODI7.003.E REV. DATE: 18/12/2015 6 de 6