Owners manual

Step-1 Beggining with the driver side, remove the tow hook rear bolt, nut from the front bolt,
( Photo 1 & 2 )
and the foam trim panel from the tow hook opening.
Step-2 From the tow hook opening, slide the vehicle attachment end of the driver side upper bracket under
the frame, rotate the bracket and position upper attachment hole in the bracket over the shank of the front
tow hook bolt and reinstall the nut. (
Photo 3 & 4
).
Step-3
Attach the driver side auxiliary bracket to the side of the frame using the tow hook rear bolt and to
the lower hole in the upper bracket using ( 1 ) 1/2 x 1 1/2" hex bolt, ( 1 ) 1/2" flat washer ( 1 ) 1/2" lock
washer
and ( 1 ) 1/2" hex nut.
( Photo 5 & 6 )
# 1
Driver side
# 2
Driver side
#3
Lado
conductor
# 4
Lado
conductor
# 5
Lado
conductor
# 6
Lado
conductor
# 4
Driver side
# 3
Driver side
# 6
Driver side
# 5
Driver side
DESIGN QUALITY FODI7.003.E REV. DATE: 18/12/2015 4 de 6