Owners manual

7
REV.01
STEP # 9
INSTALLATION INSTRUCTIONS
STEP # 10
© 2016 Go Rhino Products. All rights reserved
• Position the driver side frame bracket against the frame, inserting the bolt plate through the slots.
• Secure the frame bracket using two ½” flat washers, two ½” lock washers and two ½” hex nuts.
Both sides.
• Tape off Rhino hook to prevent scratching
• Leave the nuts loose for final adjustment.
• With assistance, lift the bumper up to the
vehicle.
• Position the bumper so the D-Shackle
mounts protrude through the rectangular
openings.
• Attach the bumper and end cap bracket to
each of the frame brackets using two


⁄
” x
1


⁄
” hex bolts, two


⁄
” lock washers and
two


⁄
” flat washers.
• Leave the bolts loose for final adjustment.
STEP # 11