Owners manual

4
REV.01
STEP # 1
INSTALLATION INSTRUCTIONS
STEP # 3
© 2016 Go Rhino Products. All rights reserved
• Remove the spare tire from the factory
spare tire mount.
• Remove the 2 bolts securing the
bumper corner bracket to the side of
the frame using a 16mm socket. Both
sides.
STEP # 2
• Behind the bumper, remove the 2 bolts
securing the bumper center bracket to
the hitch cross bar using a 16mm
socket. Both sides.
• With assistance, remove the factory
bumper from the vehicle.
• Remove the 3 bolts securing the
factory tow hook to the frame using an
18mm socket.
• The tow hook will not be reinstalled.
STEP # 4