Owners manual

REV. DATE: 3/16/2016 Page 7 of 9
Step-9 Position the bumper replacement passenger side frame bracket up to the end of the frame, align
the holes in the frame bracket with the factory bumper bracket attachment holes in the frame and secure
the frame bracket to the frame using (2) of the factory bumper bracket bolts (Photo 1). Leave the bolts
loose for final adjustment.
Step-10 Install the passenger side auxiliary bracket by positioning the bracket on the sides of the frame,
align the holes in the auxiliary bracket with the tow hook bolt holes and secure the auxiliary bracket to
the frame using (2) ½” T-Bolts, (2) ½” flat washers, (2) ½” lock washers and (2) ½” hex nuts, (Photo 2).
Leave the nuts and T-Bolts loose for final adjustment. Repeat steps 1 & 2 to install the driver side frame
and auxiliary bracket.
Step-11 Position the mounting plate/winch tray on top of the auxiliary brackets. Align the holes and
secure the mounting plate/winch tray to each frame bracket using (2) ½” x 1 ½” carriage bolts, (2) ½” flat
washers, (2) ½” lock washers and (2) ½” hex nuts, and to each auxiliary bracket using (3) ½” x 1 ½”
carriage bolts, (3) ½” flat washers, (3) ½” lock washers and (3) ½” hex nut, (Photo 3 & 4).
Photo 1
Passenger
Side
Photo 2
Passenger
Side
Photo 4
Passenger
Side
Photo 3
Passenger
Side