Owners manual

REV. DATE: 3/16/2016 Page 4 of 9
Step-8 On each side of the vehicle, remove (1) bolt securing the outer bumper support bar to the factory
bumper and loosen the (2) bolts securing the opposite end of the support bar to the vehicle frame body
mount bracket, (Photo 7). Retain the outer bolts as they will be used to secure the bumper support
bracket to the bumper replacement shell.
Step-9 With assistance support the bumper, and remove the bolts (2) per side securing the bumper and
bracket assembly to the frame, (Photo 8). Remove the bumper from the vehicle.
Step-10 On each side of the vehicle, remove (2) TORX screws securing bumper valance corner support
bracket to the headlight, (Photo 9).
Step-11 On each side of the vehicle, remove (3) bolts from the back (not shown) securing the bumper
valance side support bracket to the fender, (Photo 10).
Photo 7
Passenger
Side
Photo 8
Passenger
Side
Photo 9
Passenger
Side
Photo 10
Passenger
Side