Owners manual

REV. DATE: 2/3/2017 Page 6 of 9
Step-9 Position the bumper replacement passenger side frame bracket up to flange on the end of the frame, align
the (2) holes in the top of the frame bracket with the holes in the flange and secure the frame bracket to the outer
side of the flange using (1) ½” x 1 ½” carriage bolt, (1) ½” flat washer, (1) ½” lock washer and (1) ½” hex nut, and
to the inner side using (1) 3/8” x 1 1/4” hex bolt, (2) 3/8” flat washers, (1) 3/8” lock washer and (1) 3/8” hex nut,
(Photo 1). Leave the nuts and bolts loose for final adjustment.
Step-10 Position one of the bumper replacement frame bracket extensions behind the frame flange and secure
the frame bracket extension to the frame flange and bumper replacement frame bracket using (2) ½” x 1 ½”
carriage bolts, (2) ½” flat washers, (2) ½” lock washers and (2) ½” hex nuts, (Photo 2). Leave the nuts and bolts
loose for final adjustment.
Step-11 Position the bumper replacement passenger side auxiliary bracket on the bottom of the frame extension
bracket and the tow hook frame stanchion. Secure the auxiliary bracket to the frame extension bracket using (2)
½” x 1 ½” carriage bolts, (2) ½” flat washers, (2) ½” lock washers and (2) ½” hex nuts and to the tow hook frame
stanchion using (1) M12 x 40mm hex bolt, (1) ½” flat washer and (1) ½” lock washer, (Photo 3). Leave the nuts
and bolts loose for final adjustment.
Step-12 Position the driver side auxiliary extension bracket on the inside of the auxiliary bracket, align the holes in
the brackets and secure the extension bracket to the auxiliary bracket using (2) ½” carriage bolts, (2) ½” flat
washers, (2) ½” lock washers and (2) ½” hex nuts, (Photo 4). Leave the nuts and bolts loose for final adjustment.
Repeat steps 1 through 4 to install the driver side frame and auxiliary brackets.
#1
Passenger
Side
#2
Passenger
Side
#3
Passenger
Side
#4
Passenger
Side