Owners manual

ManualsBrandsGO RHINO ManualsAutomotiveGo Rhino 24128T BR5 Front Replacement Bumper Fits 13-17 1500

1

2

3

4

5

6

7

8

REV. DATE: 2/3/2017 Page 3 of 9

Step-4 On each side of the vehicle, remove (2) screws securing the fender liner and bumper valance, (Photo 3).

Pull the fender liner back for access and remove the bolt securing the bumper valance to the fender, (Photo 4).

Step-5 Working from side to side pull outward on the valance to unsnap the clips and remove the valance from

the vehicle.

Step-6 On each side of the vehicle, remove (3) screws securing bumper valance corner support bracket, (Photo

5). Remove the valance corner support bracket from the vehicle.

Step-7 On each side of the vehicle, remove (2) bolts securing the bumper valance center support bracket, (Photo

6). Remove the valance center support bracket from the vehicle.

Step-8 If equipped, disconnect the Fog light and Part Assist bumper wiring harnesses from the vehicle wiring

harnesses.

#3

Passenger

Side

#4

Passenger

Side

#5

Passenger

Side

#6

Passenger

Side