Solar Controller User Manual (GP-PWM-30-UL)
Table Of Contents
- 1.0 Installation Overview
- 2.0 IMPORTANT SAFETY INSTRUCTIONS
- 3.0 Tools and Materials Needed
- 4.0 Choosing a Location
- 5.0 Choosing a Battery
- 6.0 Installation Instructions
- 7.0 Wiring Diagram
- 8.0 Operating Instructions
- 9.0 Display Symbols
- 10.0 Inverter Control (on/off)
- 11.0 USB Charging
- 12.0 Bluetooth® Wireless Technology
- 13.0 Frequently Asked Questions (FAQs)
- 14.0 Troubleshooting Problems
- 15.0 Limited Warranty
- 16.0 Installation Template
GP-PWM-30-UL
_______________________________________________________________________
6
© 2019 Go Power!
Operating Consumption
(Display backlight off)
6mA
• Temperature
Compensated
• RoHS Compliant,
environmentally safe
• Accepts up to 600
watts of solar at 12
volts
• Maximum Power
Boost Technology
Battery Types Supported
Vented and Sealed (GEL, AGM etc.)
Lead Acid
Lithium Iron Phosphate (LFP or
LiFePO
4
)
Bulk/Absorption Voltage
(Sealed/Gel, AGM,
Flooded)
14.1/14.4/14.4V (25°C / 77°F),
30min / Day
or 2hr if battery voltage < 12.3V
Absorption Voltage
(LiFePO
4
)
14.4V
30min / day
Float Voltage
(Sealed/Gel, AGM,
Flooded)
13.7V (25°C / 77°F)
Float Voltage
(LiFePO
4
)
14.0V
Equalization Voltage
(Flooded only)
14.9V (25°C / 77°F),
2h / 28 Days
or if battery voltage < 12.1V
Temperature Compensation
(Sealed/Gel, AGM, Flooded
only)
- 24mV/ºC / 13mV/ºF
USB charger
5V, 800mA
Low Voltage Disconnect
(USB, Inverter off signal)
11.0 VDC after 2 to 3 minutes,
Reconnects once battery reaches:
12.8V for Sealed/Gel, AGM, Flooded
12.2V for LiFePO
4
Operating Temperature
Display Operating
Temperature
- 40 to 60°C / - 40 to 140°F
- 10 to 55°C / 14 to 131°F
Charge Current De-Rating
(Based on internal
temperature of the
controller)
Internal Temp.
Max Charge
Output Current
<80°C/176°F
37.5A
80°C/176°F
22.5A
81°C/177.8°F
15A
82°C/179.6°F
7.5A
>82°C/179.6°F
0A
Humidity
99% N.C.
Protection
Battery Reverse Polarity, Solar Array
Reverse Polarity, Over Temperature,
PV Short Circuit, Over Current
Communication
Bluetooth
®
(Use with Go Power! Connect app)










