Solar Controller User Manual (GP-PWM-30-UL)

GP-PWM-30-UL
_______________________________________________________________________
5
© 2019 Go Power!
compatible inverter is connected and set to remote mode, the controller will also
switch off the inverter. This will occur with a delay of 2 to 3 minutes.
As soon as Battery 1 reaches a voltage of 12.2 VDC (for LFP) or 12.8 VDC (for
SEALED, AGM, or FLOODED) the USB output port is switched on again. If a
compatible inverter is connected and in remote mode, it will also be switched on
again.
1.5 Bluetooth
®
Wireless Technology
The latest versions of GP-PWM-30-UL have integrated Bluetooth
®
Low Energy
wireless technology ready to be paired to your mobile device using the Go
Power! Connect app available for download from the App Store and Play Store.
1.6 Regulatory Information
1.7 Specifications
Description
Value
Dimensions (H x W x D):
108 x 190 x 35 mm
4.25 x 7.48 x 1.38 in
Weight: 300g / 10.6 oz
Maximum Wire Gauge:
#4 AWG
Warranty: 5 years
• PWM Charging
• 3 Battery Charging
profiles
• 4 Stage Charging
• Monthly Equalize
option
• Displays Charging
Current, Battery
Voltage and Battery
State of Charge
• Reverse Polarity
protected
Model
GP-PWM-30-UL
Nominal System Voltage
12 VDC
Charging Output Voltage
Range Battery 1
9.0 – 14.9 VDC
Charging Output Voltage
Range Battery 2
9.0 – 14.9 VDC
Maximum Charge Current
Battery 1
37.5A
Maximum Charge Current
Battery 2
37.5A
Maximum DC Input Voltage
35.0 VDC
Range of DC Input Voltage
9.0 – 35.0 VDC
Maximum DC Input
Operating Current
37.5 A
Maximum DC Short Circuit
Current
37.5 A
Max. Series Fuse or Circuit
Breaker
Solar/Battery 1/Battery 2
50 A
Operating Consumption
(Display backlight on)
15mA
PHOTOVOLTAIC CHARGE
CONTROLLER FOR USE IN LAND
VEHICLES
NO. E500409