Solar Controller User Manual (GP-PWM-30-UL)
Table Of Contents
- 1.0 Installation Overview
- 2.0 IMPORTANT SAFETY INSTRUCTIONS
- 3.0 Tools and Materials Needed
- 4.0 Choosing a Location
- 5.0 Choosing a Battery
- 6.0 Installation Instructions
- 7.0 Wiring Diagram
- 8.0 Operating Instructions
- 9.0 Display Symbols
- 10.0 Inverter Control (on/off)
- 11.0 USB Charging
- 12.0 Bluetooth® Wireless Technology
- 13.0 Frequently Asked Questions (FAQs)
- 14.0 Troubleshooting Problems
- 15.0 Limited Warranty
- 16.0 Installation Template
GP-PWM-30-UL
_______________________________________________________________________
35
© 2019 Go Power!
15.0 Limited Warranty
Go Power! warrants the GP-PWM-30-UL for a period of five (5) years from the
date of shipment from its factory. This warranty is valid against defects in
materials and workmanship for the five (5) year warranty period. It is not valid
against defects resulting from, but not limited to:
• Misuse and/or abuse, neglect or accident
• Exceeding the unit’s design limits
• Improper installation, including, but not limited to, improper
environmental protection and improper hook-up
• Acts of God, including lightning, floods, earthquakes, fire, and high
winds
• Damage in handling, including damage encountered during shipment
This warranty shall be considered void if the warranted product is in any way
opened or altered. The warranty will be void if any eyelet, rivets, or other
fasteners used to seal the unit are removed or altered, or if the unit’s serial
number is in any way removed, altered, replaced, defaced, or rendered illegible.
15.1 Repair and Return Information
Visit https://gpelectric.com/support/ to read the “frequently asked questions”
section of our website to troubleshoot the problem. If trouble persists:
1. Fill out our online Contact Us form or Live Chat with us
2. Email techsupport@gpelectric.com
3. Return defective product to place of purchase
16.0 Installation Template
Use the template on page 36 for flush mounting the controller.










