Solar Controller User Manual (GP-PWM-30-UL)
Table Of Contents
- 1.0 Installation Overview
- 2.0 IMPORTANT SAFETY INSTRUCTIONS
- 3.0 Tools and Materials Needed
- 4.0 Choosing a Location
- 5.0 Choosing a Battery
- 6.0 Installation Instructions
- 7.0 Wiring Diagram
- 8.0 Operating Instructions
- 9.0 Display Symbols
- 10.0 Inverter Control (on/off)
- 11.0 USB Charging
- 12.0 Bluetooth® Wireless Technology
- 13.0 Frequently Asked Questions (FAQs)
- 14.0 Troubleshooting Problems
- 15.0 Limited Warranty
- 16.0 Installation Template
GP-PWM-30-UL
_______________________________________________________________________
2
© 2019 Go Power!
Contents
1.0 Installation Overview 4
1.1 Introduction 4
1.2 System Voltage and Current 4
1.3 Battery Type 4
1.4 Low Voltage Disconnect Function (USB Port, Inverter Remote Signal) 4
1.5 Bluetooth
®
Wireless Technology 5
1.6 Regulatory Information 5
1.7 Specifications 5
2.0 IMPORTANT SAFETY INSTRUCTIONS 7
3.0 Tools and Materials Needed 9
4.0 Choosing a Location 9
5.0 Choosing a Battery 9
6.0 Installation Instructions 10
7.0 Wiring Diagram 12
7.1 Charging Only One Battery 13
7.2 Charging Two Batteries 13
8.0 Operating Instructions 14
8.1 Power Up 14
8.2 Setting the Battery Type and Charging Profile 15
8.3 Battery Charging Profile Chart 16
8.4 Maximum Power Boost Technology™ 17
8.5 Viewing the Controller Display Information 18
8.6 Resetting the Ampere Hours Charged 20
8.7 Errors 21