Solar Controller User Manual (GP-PWM-30-UL)

Table Of Contents

GP-PWM-30-UL

_______________________________________________________________________

Mode 1: Manually Scroll Through Display Information

Battery 1 Status Values

To toggle between Battery

Voltage, Charging Current and

Battery State of Charge (SOC)

for Battery 1 and 2, press the B

Button.

Push the B Button to show the

voltage for Battery 1.

Icons Displayed: Battery SOC,

Volt Symbol (V), Symbol 1

Push the B Button to show the

PV charging current for battery

1. The GP-PWM-30-UL will

begin to limit the current as

Battery 1 reaches a full charge.

The current that is not used for

Battery 1, is used to charge

Battery 2.

Icons Displayed: Arrow,

Ampere Symbol (A), Battery

SOC, Symbol 1

The battery state of charge is

shown as a percentage.

Icons Displayed: Battery SOC,

Percent Symbol (%), Symbol 1

A value of 100% will only be

displayed after a Boost or

Equalize charge completes.

Battery 2 Status Values

Push the B Button to show the

battery 2 voltage.

Icons Displayed: Battery

SOC, Volt Symbol (V),

Symbol 2

This will only be displayed if

there are two battery banks

connected and battery bank 2

is connected with correct

polarity.

GP-PWM-30-UL Solar Controller

GP-PWM-30-UL Solar Controller with Bluetooth® Wireless Technology