Solar Controller User Manual (GP-PWM-30-UL)

GP-PWM-30-UL
_______________________________________________________________________
15
© 2019 Go Power!
8.2 Setting the Battery Type and Charging Profile
Setting Battery 1
To set the battery type for
battery bank 1, hold the B
Button for 3 seconds. When
the display shows a blinking
number 1, release the B
Button.
Next, select the charging
profile of battery bank 1 by
pressing the B Button to
toggle through the profile
options: Sealed/Gel, AGM,
Flooded, or LFP.
To confirm the battery
profile, press and hold the A
Button for 3 seconds.
Setting Battery 2
If you have a second battery
bank connected, the
controller will immediately
prompt you to set the battery
type for Battery 2 with a
blinking number 2.
If there is not a second battery bank connected to the controller,
or if the second battery bank is connected with reverse polarity,
the controller will not prompt you to select battery type for
Battery 2, and no status information will be displayed on the LCD screen.
GP-PWM-30-UL Solar Controller with Bluetooth® Wireless Technology
GP-PWM-30-UL Solar Controller
GP-PWM-30-UL SOLAR CONTROLLER
GP-PWM-30-UL Solar Controller with Bluetooth® Wireless Technology
GP-PWM-30-UL Solar Controller with Bluetooth® Wireless Technology