User Manual

gpelectric.com | [page 5]
2. GENERAL INFORMATION
Congratulations on purchasing your Go Power! Solar All Electric Kit. You have chosen a clean, quiet and sustainable power
source. Go Power! Solar Kits allow you to power appliances o󰀨-gird, without hooking up to shore power or a noisy generator. Go
Power! solar kits will keep your batteries charged, ensuring you have power when you need it.
This large mobile DC power system is designed for full-time living—even powering a residential-sized electric refrigerator, in
addition to lights, fans or water pumps. To power AC electronics or devices o󰀨-grid, such as a television or co󰀨ee maker, a DC
to AC power inverter (sold separately) will be necessary. As with any o󰀨-grid power systems, the user is required to manage
electrical loads to ensure continual power availability for essential services like the refrigerator. Your location and season (hours
of sunlight available) play a role in how much energy can be harnessed from this kit.
This manual will aid in the process of installing the Go Power! Solar All Electric Kit. Please read and understand this
manual and all included manuals before installing the Go Power! All Electric Solar Kit. Review all diagrams included
in this guide for the easiest and safest installation. Please retain this manual for future reference.
Note
2.1 DISCLAIMERS
IMPORTANT: Please follow installation and wiring instructions exactly as outlined to ensure safety. We recommend installation
by an RV technician or professional electrician to ensure adherence to relevant electrical codes. We have made every reasonable
e󰀨ort to ensure the accuracy of the instructions in this manual, but Go Power! does not guarantee that the information is error
free, nor do we make any other representation, warranty or guarantee that the information is accurate, correct, reliable or cur-
rent. The specications in this manual are for reference purposes only and are subject to change without notice. For additional
information please see www.gpelectric.com.
DISCLAIMER: This kit has been engineered for use in a mobile application. Any variance by the end-user is solely of their own
discretion. Valterra Power LLC (Go Power!) assumes no responsibility for improper installation in accordance with any laws and
regulations governing: cottage, residential or commercial applications. Go Power! disclaims liability for any direct, indirect or
incidental damages caused by, or in case of, installation not performed following the instructions and cautions in this manual. Go
Power! will refuse requests for exchanges or returns, resulting from the purchase and installation of items which do not comply
with local codes. To avoid such concerns Go Power! recommends installation by a professional electrician or RV technician.
Examples that are shown within this manual are for illustrative purposes only.
2.2 HOW DOES A GO POWER! SOLAR CHARGING KIT WORK?
The solar panel converts the sun’s energy into DC electricity and this electricity charges the battery. The battery stores the elec-
tricity, similar to a water tank storing water. This battery power may be used at any time to operate DC powered devices connected
to the battery. To increase the battery service life, a solar controller is used to prevent the solar panels from overcharging the
batteries. This process is managed by the GP-MPPT-PRO-60 controller(s) included in this kit. (See Figure 2-A and 2-B on the
following page for examples).
The Go Power! SOLAR-AE6 Kit includes 6 solar panels and the SOLAR-AE4 includes 4 solar panels for use with a
12-volt system.
WARNING: The solar panels in the SOLAR-AE6 kit are designed to be connected in 2 strings of 3 panels in
SERIES. Failure to follow this will cause the system to produce large voltages or currents which the GP-MPPT-
PRO-60 Solar Controller, Solar Disconnect and cabling is not designed to handle.
WARNING: The solar panels in the SOLAR-AE4 kit are designed to be connected in SERIES. Failure to follow
this will cause the system to produce large currents which the Solar Disconnect and cabling is not designed
to handle.
WARNING: Incorrect wiring can result in irreparable damage to the system (not covered under warranty), re,
or serious injuries.
Note