Go Power! Manual GP-Smart Charger Go Power! Electric Inc. PO Box 6033 Victoria, BC V8P 5L4 Toll Free Tel: 866-247-6527 Toll Free Fax: 866-607-6527 Email: info@gpelectric.
Go Power! Smart Charger Owner’s Manual Table of Contents 1. IMPORTANT SAFETY INSTRUCTIONS .................................. 3 2. FEATURES................................................................................ 3 3. LED STATUS TROUBLESHOOTING ....................................... 7 4. WARRANTY .............................................................................. 7 Go Power! Electric Inc.
Go Power! Smart Charger Owner’s Manual 1. Important Safety Instructions Warning! Before you install and use your GP Battery Charger, be sure to read these safety instructions To get the most out of your battery charger, it must be installed and used properly. Please read the instructions in this manual before installing and using your battery charger. 1.1 General Safety Precautions 1. Do not expose the GP Battery Charger to rain, snow, spray, bilge or dust.
Go Power! Smart Charger Owner’s Manual • • • • • Ignition protection Output short circuit protection over power protection Switch mode technology Easy to read LED for system status Compact size, light weight 2.1 Battery Charging Curve IU Charging Characteristic 2.
Go Power! Smart Charger Owner’s Manual 2.3 Mechanical Drawings Front view: Power ON/OFF switch, leave in the OFF position during the installation. Back view: 2.
Go Power! Smart Charger Owner’s Manual 2.
Go Power! Smart Charger Owner’s Manual 3. LED Status Troubleshooting Problem and Symptoms “Red” LED Blinking Possible Cause Solution Battery is disconnected LED light off Battery fault No AC power delivering Check the battery connection Change battery Check input power connection Change cables to the correct polarity. - Check DC fuse, if broken replace the fuse. Make sure ventilation is not obstructed. Improve ventilation. Reduce ambient temperature. Polarity reverse Thermal Shutdown 3.
